Vanderbilt Door security

A flush-mounting kit designed to provide an unobtrusive and aesthetically appealing installation of the K42, K44Duo, and M43 electronic keypads as well as PP500-EM and PP500-Cotag readers.

Vanderbilt KEY NO:04 is a RTP key for housing.

Vanderbilt LOCK&KEYS 02 is a RTP lock and key.

Vanderbilt LOCK&KEYS 07 is a RTP lock and key.

Vanderbilt LOCK&KEYS 09 is a RTP lock and key.

Vanderbilt CARD-LA is a blue safety lanyard with clip.

Vanderbilt MK-2000-22 is a 25mm round plastic adapter with strong magnet.

Vanderbilt KEY NO:02 is a RTP key for housing.

Vanderbilt KEY NO:05 is a RTP key for housing.

Vanderbilt KEY NO:09 is a RTP key for housing.

Vanderbilt LOCK&KEYS 05 is a RTP lock and key.

Vanderbilt LOCK&KEYS 06 is a RTP lock and key.

Flush mount plate for ACT Panel mount readers ACTpro MF1030PM.

Vanderbilt MK-2000-21 is a 25mm round plastic adapter.

Vanderbilt KEY NO:03 is a RTP key for housing.

Vanderbilt LOCK&KEYS 10 is a RTP lock and key.

Vanderbilt AAC-1024-VMS licence allows integration of over 256 doors between SiPass integrated and applicable VMS systems where the VMS system is the head end software.

A versatile reader bracket that can be used for wall or pole mounting of the LR-series readers Easy to assemble and configure The possibility to adjust tilt and swivel angle enables optimal tuning of the reader position Suitable for both indoor and outdoor use

Vanderbilt KEY NO:10 is a RTP key for housing.

Vanderbilt LOCK&KEYS 03 is a RTP lock and key.

Vanderbilt LOCK&KEYS 08 is a RTP lock and key.

A protective cover for VRxxS-MF and ARxxS-MF readers There are cuttings for cables to simplify the process of adding it to an existing installation

Vanderbilt LOCK&KEYS 04 is a RTP lock and key.

Vanderbilt KEY NO:07 is a RTP key for housing.

Vanderbilt KEY NO:08 is a RTP key for housing.

Provides compatibly for the VR10S-MF Smart Card 13.56 MHz and VR40S-MF Smart Card 13.56 MHz readers with the SPC intrusion system

Expansion licence to add (1- 256) ASSA Aperio wireless locks to the ACT Enterprise system Required for each wireless device

Supports 8 inputs and 8 outputs per device Each ACTpro controller supports up to 4 IO Modules (32 inputs and 32 outputs) The IO Module allows an ACTpro controller to be used in applications where signalling to other equipment is required