Honeywell Security Network monitoring

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Internal storage capacity of 60TB (6 x 10 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 32 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

ADPRO iFT-E 16 IP channels, 6TB and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

High decoding capability for 4K Ultra HD (UHD) viewing and recording View 16-channels simultaneously with synchronised real-time playback on monitor Up to 12 MP (4K) resolution live view and playback 8TB internal storage H.265/H.264 codec decoding HDMI/ VGA simultaneous video output 16 PoE ports UL listed Supports up to 4 alarm input channels and 2 alarm relay output channels Supports sending notifications through email, FTP, and/or HTTP Supports recording a video clip of events for distribution Supports uploading still images at the time of the event through email and/or FTP Configurable to automatically detect and respond to motion in the scene, alarm inputs, and network failure or tampering Maximum incoming bandwidth of 320 Mbps Supports visual or auditory notifications (a flashing light, bell, or siren) Supports fisheye video de-warping in local and web user interface

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Internal storage capacity of 8TB (2 x 4 TB) 1 solid state drive with operating system and 2 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 64 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

Supports simultaneous recording, live monitoring, search and system management for 48 IP cameras including high definition formats Internal storage capacity of 16TB (4 x 4 TB) 1 solid state drive with operating system and 4 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 48 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

ADPRO iFT 16 IP channels, 6TB and 8 inputs / 4 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses and bulk firmware upgrade remotely Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

High decoding capability for 4K Ultra HD (UHD) viewing and recording View 32-channels simultaneously with synchronised real-time playback on monitor Up to 12 MP (4K) resolution live view and playback 8TB internal storage H.265/H.264 codec decoding 2 HDMI/ VGA simultaneous video output 16 PoE ports UL listed Supports up to 16 alarm input channels and 6 alarm relay output channels Supports sending notifications through email, FTP, and/or HTTP Supports recording a video clip of events for distribution Supports uploading still images at the time of the event through email and/or FTP Configurable to automatically detect and respond to motion in the scene, alarm inputs, and network failure or tampering Maximum incoming bandwidth of 320 Mbps Supports visual or auditory notifications (a flashing light, bell, or siren) Supports fisheye video de-warping in local and web user interface

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Internal storage capacity of 4TB (1 x 4 TB) 1 solid state drive with operating system and 1 removable bay Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 64 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

Supports simultaneous recording, live monitoring, search and system management for 48 IP cameras including high definition formats Internal storage capacity of 36TB (6 x 6 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 48 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

Supports simultaneous recording, live monitoring, search and system management for 48 IP cameras including high definition formats Internal storage capacity of 60TB (6 x 10 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 48 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

ADPRO iFT 32 IP channels, 6TB and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses and bulk firmware upgrade remotely Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

ADPRO iFT 32 IP channels, 2x8TB HDD SED and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses and bulk firmware upgrade remotely Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

Supports simultaneous recording, live monitoring, search and system management for 48 IP cameras including high definition formats Internal storage capacity of 48TB (6 x 8 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 48 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

High decoding capability for 4K Ultra HD (UHD) viewing and recording View 1- to 4-channels simultaneously with synchronised real-time playback on monitor (depending on the decoding capacity and recording resolution) Up to 8 MP (4K) resolution live view and playback Supports H.265 HEVC Smart Codec/H.264/MJPEG Video Codec De-warp fisheye camera video in NVR local, web client, Honeywell Video Management Viewer (HVMV) and HVMV Mobile App for 360° situational awareness Together with 30/60 Series cameras, offers bandwith saving features such as Dynamic Intra-Frame Period, Smart Codec and Smart Frame Rate Received People Detection Notification for efficient and effective protection With two-way audio communication between the Honeywell Video Management Viewer (HVMV) to 30/60 Series cameras, intruders can be  warned to leave before any damage is done

Supports simultaneous recording, live monitoring, search and system management for 8 IP cameras including high definition formats Internal storage capacity of 12TB Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR XE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for up to 8 IP channels Includes HDMI, DVI-D and DVI-I ports for dual local monitor support providing access to monitoring and configuration interface Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface DVD R/W drive for burning evidence clips. Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system Small desktop type footprint suitable for small spaces with internal fixed drives, SATA hard drives used for operating system partition and video storage

Supports simultaneous recording, live monitoring, search and system management for 48 IP cameras including high definition formats Internal storage capacity of 4TB (1 x 4 TB) 1 solid state drive with operating system and 1 removable bay Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 48 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Internal storage capacity of 48TB (6 x 8 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 64 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

High decoding capability for 4K Ultra HD (UHD) viewing and recording View 64-channels simultaneously with synchronised real-time playback on monitor Up to 12 MP (4K) resolution live view and playback 16TB internal storage H.265/H.264 codec decoding 2 HDMI/ VGA simultaneous video output 16 PoE ports UL listed Supports up to 16 alarm input channels and 6 alarm relay output channels Supports sending notifications through email, FTP, and/or HTTP Supports recording a video clip of events for distribution Supports uploading still images at the time of the event through email and/or FTP Configurable to automatically detect and respond to motion in the scene, alarm inputs, and network failure or tampering Maximum incoming bandwidth of 320 Mbps Supports visual or auditory notifications (a flashing light, bell, or siren) Supports fisheye video de-warping in local and web user interface

ADPRO iFT 6 IP channels, 10TB and 8 inputs / 4 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses and bulk firmware upgrade remotely Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Internal storage capacity of 36TB (6 x 6 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 32 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

ADPRO iFT-E 32 IP channels, 2x8TB HDD SED and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

Supports simultaneous recording, live monitoring, search and system management for 8 IP cameras including high definition formats Internal storage capacity of 16TB Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR XE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for up to 8 IP channels Includes HDMI, DVI-D and DVI-I ports for dual local monitor support providing access to monitoring and configuration interface Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface DVD R/W drive for burning evidence clips. Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system Small desktop type footprint suitable for small spaces with internal fixed drives, SATA hard drives used for operating system partition and video storage

Supports simultaneous recording, live monitoring, search and system management for 48 IP cameras including high definition formats Internal storage capacity of 8TB (2 x 4 TB) 1 solid state drive with operating system and 2 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 48 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

High decoding capability for 4K Ultra HD (UHD) viewing and recording View 1- to 4-channels simultaneously with synchronised real-time playback on monitor (depending on the decoding capacity and recording resolution) Up to 8 MP (4K) resolution live view and playback Supports H.265 HEVC Smart Codec/H.264/MJPEG Video Codec De-warp fisheye camera video in NVR local, web client, Honeywell Video Management Viewer (HVMV) and HVMV Mobile App for 360° situational awareness Together with 30/60 Series cameras, offers bandwith saving features such as Dynamic Intra-Frame Period, Smart Codec and Smart Frame Rate Received People Detection Notification for efficient and effective protection With two-way audio communication between the Honeywell Video Management Viewer (HVMV) to 30/60 Series cameras, intruders can be  warned to leave before any damage is done

High decoding capability for 4K Ultra HD (UHD) viewing and recording View 32-channels simultaneously with synchronised real-time playback on monitor Up to 12 MP (4K) resolution live view and playback 16TB internal storage H.265/H.264 codec decoding 2 HDMI/ VGA simultaneous video output 16 PoE ports UL listed Supports up to 16 alarm input channels and 6 alarm relay output channels Supports sending notifications through email, FTP, and/or HTTP Supports recording a video clip of events for distribution Supports uploading still images at the time of the event through email and/or FTP Configurable to automatically detect and respond to motion in the scene, alarm inputs, and network failure or tampering Maximum incoming bandwidth of 320 Mbps Supports visual or auditory notifications (a flashing light, bell, or siren) Supports fisheye video de-warping in local and web user interface

Supports simultaneous recording, live monitoring, search and system management for 8 IP cameras including high definition formats Internal storage capacity of 8TB Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR XE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for up to 8 IP channels Includes HDMI, DVI-D and DVI-I ports for dual local monitor support providing access to monitoring and configuration interface Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface DVD R/W drive for burning evidence clips. Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system Small desktop type footprint suitable for small spaces with internal fixed drives, SATA hard drives used for operating system partition and video storage

ADPRO iFT 16 IP channels, 4TB and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses and bulk firmware upgrade remotely Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

ADPRO iFT 32 IP channels, 10TB and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses and bulk firmware upgrade remotely Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management