HID Door access control

Features: Can store up to approximately 100 user templates and supports USB, SPI or UART interfaces Low power consumption Compact size High durability silicon surface Windows® 32-bit and 64-bit, Linux® x86, embedded systems (with and without OS) Applications: Embedded systems, such as: Garage door openers USB flash drives Car alarms and more

Features: FIPS 201 PIV certified Module ID FAP 20 certified Low power consumption Fine-grained power control Compact size Blue platen illumination 500 dpi images High-durability glass top surface IP64-rated top surface sealed against dust and liquid High-quality fingerprint image Counterfeit finger rejection Compatible with DigitalPersona SDKs for Windows®, Linux® and Android® Applications: ID Verification for: Civil ID/Voting/Entitlement services Microfinance and healthcare Mobile ID terminals

Ideal for use in converged physical and logical access environments, the OMNIKEY 5326 dual frequency reader supports both low and high frequency technologies for easy and seamless migration from legacy cards to the latest 13.36 MHz smart card technology. The OMNIKEY 5326 is easy to set up with the CCID interface that uses generic operating system drivers and supports non-standard IT platforms, reducing IT administration efforts.

HID Global pivCLASS government solutions enable facilities to upgrade their existing  physical access control system (PACS) to FIPS  201 compliance. It supports multiple card types, such as PIV, PIV-I, CAC, CIV (a.k.a., PIV-C), TWIC and FRAC, as well as iCLASS® and HID Prox cards for easy, phased transitions from legacy technology to new PKI-enabled smart cards. pivCLASS readers work with the pivCLASS authentication module to perform a PKI challenge-response in addition to a signature check to validate the card authentication key (CAK).

The MiniProx proximity card reader’s potted electronics enhance the security of the reader.  The slim, attractive design is ideal for indoor or outdoor mounting. It offers high reliability, consistent read-range and low power consumption in an easy-to-install package. It provides multicolor LED, compatibility with all standard access control systems and internal or host control of LED and beeper.

Built on the world leading iCLASS® reader architecture, HID Global’s Rijkspas-compliant smart card readers are designed for Dutch Government agencies adopting MIFARE® DESFire® EV1 smart card technology as required by the Rijkspas specification. The iCLASS Rijkspas reader can be easily reconfigured to support additional or substitute applications, including traditional iCLASS credentials, allowing installations the flexibility to address a change in tenancy.

The Indala 125 kHz Mid-Range Reader product line is HID’s latest offering of highly-secure proximity readers. The HID Indala Mid-Range reader, with FlexSecur® technology, is designed for applications requiring a longer read range of up to 12 inches. All HID Indala 125 kHz proximity readers feature FlexSecur technology, which provides an added level of access system security through a verification process at the reader.

Highly secure – Seos is Secure Identity Object (SIO)-enabled, allowing for multilayered security beyond the card technology and protecting identity data from unauthorised access Certified – Based on Common Criteria (CC) EAL 5+ hardware platform, ensuring a clear chain of evidence that the platform’s security attributes have been rigorously tested and independently verified High durability – All the power of Seos technology packed into a robust ABS shell construction that provides protection in harsh environments Slot-punched – Simply attach to a lanyard with ease for swift deployment, no plastic cardholders needed Multi-application – Part of the iCLASS SE platform, an open and standards-based solution that supports data storage for multiple applications beyond traditional access control such as secure printing, time and attendance, cashless vending and biometric templates Heightened privacy protection – Seos offers best-in-class data and privacy protection by incorporating mutual authentication and secure messaging mechanisms into stringent best practices for data protection

The Lumidigm V371 fingerprint reader combines the biometric authentication of HID Global’s multispectral fingerprint sensors and best-in-class contactless OMNIKEY desktop card-reading technology into a single, integrated unit for strong multi-factor authentication. The Lumidigm V371 fingerprint reader is ideal for applications leveraging biometric citizen ID cards. With the easy-to-integrate and compact V371, multi-factor authentication can be effortlessly and cost-effectively implemented in applications such as government benefit distribution, voter ID, bank account applications, high-value financial transactions, healthcare eligibility verification, and e-prescribing.

Ideal migration solution – Mutual use of 13.56 MHz read/write iCLASS, MIFARE® Classic and MIFARE DESFire EV1 contactless smart card  technologies Wide variety of applications – Physical access control, biometrics, secure computer/network authentication, time and attendance, vending and more ISO Standard thickness – Use with all direct imaging and thermal transfer printers Security – Upgradable to next generation iCLASS® SE™ platform: iCLASS SE, SIO-Enabled for MIFARE and MIFARE DESFire EV1 iCLASS® 13.56 MHz read/write contactless smart card provides high speed, reliable communications with high data integrity, ensuring high security with mutual authentication, encrypted data transfer and 64-bit diversified keys for read/write capabilities Card data is protected by triple DES encryption MIFARE® Classic MIFARE Classic offers fast and convenient transactions and is used worldwide for access control, cashless vending and public transportation applications MIFARE Application Directory (MAD) allows flexible programming of additional applications to the MIFARE Classic card MIFARE Classic technology uses a mutual authentication and data encryption with a 32 or 56 bit serial number MIFARE® DESFire® EV1 MIFARE DESFire EV1 is based on open global standards for security, and is interoperable with existing MIFARE DESFire infrastructures Transaction times are less than 100 milliseconds for a typical secure ticketing transaction

Smart cards incorporating iCLASS + MIFARE Classic or iCLASS + MIFARE DESFire EV1, are great for organizations with multiple reader types and for those transitioning from one technology to another. HID can also embed a wide range of commercially available contact chips, or customers can select HID's off-the-shelf Crescendo® multi-technology smart card, providing strong authentication options with logical access systems.

Ideal migration solution – Mutual use of 13.56 MHz read/write iCLASS, MIFARE® Classic and MIFARE DESFire EV1 contactless smart card  technologies Wide variety of applications – Physical access control, biometrics, secure computer/network authentication, time and attendance, vending and more ISO Standard thickness – Use with all direct imaging and thermal transfer printers Security – Upgradable to next generation iCLASS® SE™ platform: iCLASS SE, SIO-Enabled for MIFARE and MIFARE DESFire EV1 iCLASS® 13.56 MHz read/write contactless smart card provides high speed, reliable communications with high data integrity, ensuring high security with mutual authentication, encrypted data transfer and 64-bit diversified keys for read/write capabilities Card data is protected by triple DES encryption MIFARE® Classic MIFARE Classic offers fast and convenient transactions and is used worldwide for access control, cashless vending and public transportation applications MIFARE Application Directory (MAD) allows flexible programming of additional applications to the MIFARE Classic card MIFARE Classic technology uses a mutual authentication and data encryption with a 32 or 56 bit serial number MIFARE® DESFire® EV1 MIFARE DESFire EV1 is based on open global standards for security, and is interoperable with existing MIFARE DESFire infrastructures Transaction times are less than 100 milliseconds for a typical secure ticketing transaction

Ideal migration solution – Mutual use of 13.56 MHz read/write iCLASS, MIFARE® Classic and MIFARE DESFire EV1 contactless smart card  technologies Wide variety of applications – Physical access control, biometrics, secure computer/network authentication, time and attendance, vending and more ISO Standard thickness – Use with all direct imaging and thermal transfer printers Security – Upgradable to next generation iCLASS® SE™ platform: iCLASS SE, SIO-Enabled for MIFARE and MIFARE DESFire EV1 iCLASS® 13.56 MHz read/write contactless smart card provides high speed, reliable communications with high data integrity, ensuring high security with mutual authentication, encrypted data transfer and 64-bit diversified keys for read/write capabilities Card data is protected by triple DES encryption MIFARE® Classic MIFARE Classic offers fast and convenient transactions and is used worldwide for access control, cashless vending and public transportation applications MIFARE Application Directory (MAD) allows flexible programming of additional applications to the MIFARE Classic card MIFARE Classic technology uses a mutual authentication and data encryption with a 32 or 56 bit serial number  MIFARE® DESFire® EV1 MIFARE DESFire EV1 is based on open global standards for security, and is interoperable with existing MIFARE DESFire infrastructures Transaction times are less than 100 milliseconds for a typical secure ticketing transaction

HID Global pivCLASS government solutions enable facilities to upgrade their existing physical access control system (PACS) to FIPS 201 compliance. It is architected for maximum security and affordability. pivCLASS uses the pivCLASS Authentication Module to perform the cryptographic functionality and to pass Wiegand-formatted data to the PACS controller. It locates the critical security operations within the secure perimeter, rather than on the attack side of the door, increases security and reader affordability.    

HID Global’s EDGE EVO® Solo ESHRP40-K controller/ reader and module is a cost-effective, stand-alone, single-door IP -enabled access control solution that distributes intelligence right to the door. EDGE EVO Solo provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by removing the need to install a separate power supply.

HID Global pivCLASS government solutions enable facilities to upgrade their existing  physical access control system (PACS) to FIPS  201 compliance. It supports multiple card types, such as PIV, PIV-I, CAC, CIV (a.k.a., PIV-C), TWIC and FRAC, as well as iCLASS® and HID Prox cards for easy, phased transitions from legacy technology to new PKI-enabled smart cards. pivCLASS readers work with the pivCLASS authentication module to perform a PKI challenge-response in addition to a signature check to validate the card authentication key (CAK).

As part of HID global networked access solutions family, the EDGE EVO® Hi-O interface modules provide door and extended IO interface between IO and an EDGE EVO Controller.  The interface module provides a securely located IO interface to door components such as locks and other components. It also enables the expansion of IO monitoring and control, all connected back to one single-door controller with the potential to power everything over PoE. 

iCLASS® Transit Readers are revolutionary hybrid contactless smart card readers that read secure user identification data from HID iCLASS credentials and unique serial numbers from Sony FeliCa™, CEPAS and MIFARE® cards for access control. Since the Transit Reader can read multiple card types, it provides you with one solution for all your access control requirements, now and into the future. Using the 13.56 MHz technology platform, iCLASS Transit Readers offer a long read range with the power and heightened security of smart card technology, making them ideal for access control applications.

iClass SE readers are highly adaptable and secure high frequency access control solution. It provides multi-layered security beyond the card technology, providing added protection to identity data using SIOs.

HID Global pivCLASS government solutions enable facilities to upgrade their existing  physical access control system (PACS) to FIPS  201 compliance. It supports multiple card types, such as PIV, PIV-I, CAC, CIV (a.k.a., PIV-C), TWIC and FRAC, as well as iCLASS® and HID Prox cards for easy, phased transitions from legacy technology to new PKI-enabled smart cards. pivCLASS readers work with the pivCLASS authentication module to perform a PKI challenge-response in addition to a signature check to validate the card authentication key (CAK).

iClass SE readers are highly adaptable and secure high frequency access control solution. It provides multi-layered security beyond the card technology, providing added protection to identity data using SIOs.

HID Global’s EDGE EVO® Solo ESHR40-L controller/reader and module is a costeffective, stand-alone, single-door IP -enabled access control solution that distributes intelligence right to the door. EDGE EVO Solo provides the ability to power all devices around a door using Power over Ethernet (PoE), significantly reducing total door installation costs by removing the need to install a separate power supply. The integrated controller and reader offers interoperability with iCLASS® credentials.

Compact and convenient – All the power of iCLASS® Seos® technology packed into a convenient, pocket-size key fob, designed to be neatly attached to a key ring for secure, versatile, and open standards-based access control. Highly secure – Seos is Secure Identity Object (SIO)-enabled, allowing for multilayered security beyond the card technology and protecting identity data from unauthorised access. Certified – Based on Common Criteria (CC) EAL 5+ hardware platform, ensuring a clear chain of evidence that the platform’s security attributes have been rigorously tested and independently verified. Multi-application – Part of the iCLASS SE® platform, an open and standards-based solution that supports data storage for multiple applications beyond traditional access control such as secure printing, time and attendance, cashless vending and biometric templates. Heightened privacy protection – Seos offers best-in-class data and privacy protection by incorporating mutual authentication and secure messaging mechanisms into stringent best practices for data protection. Greater durability – Molded housing for maximum protection in harsh environments, capable of withstanding elevated operating temperatures when compared with cards. Compatibility - Supports iCLASS SE single-technology and iCLASS SE Express reader deployments.

Built on the world leading iCLASS® reader architecture, HID Global’s Rijkspas-compliant smart card readers are designed for Dutch Government agencies adopting MIFARE® DESFire® EV1 smart card technology as required by the Rijkspas specification. The iCLASS Rijkspas reader can be easily reconfigured to support additional or substitute applications, including traditional iCLASS credentials, allowing installations the flexibility to address a change in tenancy.

Custom Rules Processing - Use X300 in conjunction with custom rules engine on X1100 to create elaborate rules for handling input states Elevator Control - Use in conjunction with X1100 elevator processing engine to control elevator floor access IO Module Encryption - Enhance security between intelligent controller and IO modules with AES encryption Crypto Chips - Protect against malicious attacks to keep keys and passwords safe Threat Levels - Define up to 7 different threat levels that are used to instantaneously adjust user access during lockdowns and lockouts Open Architecture – Work with a variety of software partners over time without any re-investment in hardware

Smart cards incorporating iCLASS + MIFARE Classic or iCLASS + MIFARE DESFire EV1, with HID Prox, are great for organizations with multiple reader types and for those transitioning from one technology to another. In addition to the two high frequency technology options, all cards are available with HID Prox or magnetic stripe technology to provide the widest range of backwards compatibility with existing systems.

Features: FIPS 201 PIV certified SteelCoat Low power consumption Compact size High durability silicon surface IP65-rated top surface sealed against dust and liquid (Requires to add external gasket) High quality fingerprint image OS: Windows® 7, 8 and 10, Win CE, Linux®, Android and embedded systems (with and without OS) Applications: ID Verification for: Civil ID/Voting/Entitlement Services Physical Access Finance, Healthcare and Point of Sale Mobile ID Terminals

iClass SE readers are highly adaptable and secure high frequency access control solution. It provides multi-layered security beyond the card technology, providing added protection to identity data using SIOs.