DSC Security management

DSC IT-230 RS-422 is an interface module that is compatible with PowerSeries panels v4.5 and higher enables integration to Z-wave devices, cameras and C24 TouchScreens. It has a 4-wire keybus and included PC-LINK header hookup.

Dimension: 4" (H) x 2.375" (W) x 2" (D) North America Plug Inputs: 100-240VAC, 50/60Hz Outputs: 13.8VDC, 1Amp UL model: ADP1310-NAU

DSC RM-2 is an end-of-line power supervisory relay (4-wire detectors only).

Dual telephone line compatible with the SG-System IV Supports two-way audio via hook flash only Up to 64 profiles Patented Caller ID and Automatic handshake selection Hot swappable 8 different handshake per profile Pulse, Contact ID, Super fast, SIA, Bosch Modem

Fully supervised for AC failure, low battery and AUX failure Provides up to 1 Amp @ 12 VDC Compatible with HS2016, HS2032, HS2064, HS2128 control panels

DSC WS4979 is a 4-button wireless wall plate that features a slim, attractive design to fits nicely on homeowners’ inside walls or other accessible locations. The WS4979 has all of the same functions as the WS4939 4 button wireless key and can be mounted or installed easily, at minimal cost.

DSC PC5900 is a talk/listen-in audio verification module that has up to 4 audio stations. It is compatible with PC1616, PC1832 and PC1864 control panels and can be remotely controlled via touchtone phone when operated during 2-way session.

Supports up to 128 wireless zones and 32 wireless keys – varies per panel Supports DSC PowerG devices Compatible with PowerG Repeater (PG9920) for range extension All wireless detectors are fully supervised for communication integrity

Fully supervised for AC failure, low battery and AUX failure adds 4 programmable high current voltage outputs: rated at 1 Amp @ 12 VDC Output #1 can be used as a supervised bell output Provides up to 1 Amp @ 12 VDC

DSC SG-SII-RMK is a rack mount kit for SG-SYSTEM I-IP or SG-SYSTEM-II to mount in any standard 19" rack.

DSC PC4664 is a point graphic annunciator that features pre-printed point display transparency and egg-crate backplate for flexible LED locations.

DSC HSM2208 is an output module that provides 8 low current (50 mA) programmable outputs.

DSC WP-433 is a wireless device programmer that simplifies enrolling and programming of wireless devices. It is compatible with PowerSeries and supports all DSC door/window contacts, PIRs, glassbreak detectors and wireless keys.

Each line card supports up to 1,536 supervised and up to 9216 accounts totals Works over local LAN/WAN network as well as the Internet 128-bit AES encryption Polling and hardware substitution protection for the transmitters Compatible with 10/100BaseT networks UL standard & encrypted line security

2x16 full message display Intuitive clock programming Multiple door chime Blue display White keymat backlight Displays outdoor temperature Voice Prompts (*HS2LCDWFPV9 only) Installer programming Multi-language support 5 programmable function keys Fire, medical and panic keys Tamper switch Proximity with MPT mini prox tags

Dual telephone line compatible with the SG-System III Supports two-way audio via hook flash only Up to 64 profiles Patented Caller ID and Automatic handshake selection Hot swappable 8 different handshakes per profile Pulse, Contact ID, Super fast, SIA, Bosch Modem

DSC IT-100 PowerSeries integration module that features 4-wire hook-up to KEYBUS, real-time zone status, bi-directional RS-232 interface and supports many integration drivers.

Commercial fire ethernet IP communicator Works with any control panel that communicates using contact ID format Configured for standalone commercial fire applications Compliant with NFPA72 Editions: 2002, 2007, 2010 Power supply included Compatible with most control panels that use the Contact ID format

DSC PC4701 is a MAXSYS dual-line dialer module that has supervised phone line connections. It has a 1 2-wire Class B/Style B supervised smoke alarm zone.

Allows extension of the PC-LINK connection by 50 feet(15 m) so communicator can be mounted in separate enclosure from panel Distance can be extended up to 1000 feet (300 m) if additional power supply is used Compatible with 3G2080, TL2803G and TL280 alarm communicators

Single telephone line compatible with the SG-System III Supports bridge mode for two-way audio pass-through Up to 64 profiles Patented Caller ID and Automatic handshake selection (AHS) Hot swappable 8 different handshakes per profile Pulse, Contact ID, Super fast, SIA, Bosch Modem

DSC FSD-100 is an handheld test meter easily accomplished with the non-contact FSD-100 handheld test meter. It is powered by a standard 9V alkaline battery and small enough to fit inside a shirt pocket, the FSD-100 holds 500 readings that can be downloaded to any computer. To initiate a reading, a technician simply holds the FSD-100 near a DSC smoke detector and activates the detector’s test button.

DSC MAXSYS_Readers supports a wide range of 26-bit Weigand readers: Polaris™, ioProx™, Shadowprox™, HID and Kantech XSF Technologies.

DSC WS8920 is a 1-way wireless repeater compatible with existing security systems including ALEXOR, PowerSeries 9045,PowerSeries and MAXSYS. It identifies the optimal location for mounting taking in to consideration noise and interference.

DSC HSM2108 is a 8-hardwired zone expander module that features AUX power up to 125 mA (PTC protected).

DSC EV-DW4927SS is a wireless shock sensor with built-in door/window contact. It has an adjustable sensitivity and user-replaceable lithium battery.

DSC PC4632 is a MAXSYS point graphic annunciators that has egg-crate backplate for flexible LED locations. It has a pre-printed point display transparency and clear transparencies (2) for custom graphics.

DSC WS4920 is a 1-way wireless repeater compatible with existing security systems including ALEXOR, PowerSeries 9045,PowerSeries and MAXSYS. It identifies the optimal location for mounting taking in to consideration noise and interference.