ComNet PoE

The CLSETUP provides a simple way to setup and focus PoE-powered IP cameras, and is an ideal diagnostic tool for installers working with both CCTV and IT PoE-based systems.

The ComNet™ CNFE4+1SMS(M,S)2POE is a five-port Ethernet switch with uplink management functionality and provides 4 copper ports operating at 10/100Mbs and is designed to combine four electrical ports into a single optical port that forwards this data to the next network device.

The ComNet™ CNFE6+2USPOE provides 8 Ethernet ports operating at 10/100Mbps and is designed to combine six electrical ports into a second optical port that forwards this data to the next CNFE6+2USPOE. The optical ports are designed to forward the data from the six electrical ports to the next switch, to a PC, or another Ethernet connection. In addition, the electrical ports can supply up to thirty (30) watts of power (“Power Over Ethernet”) to remote Ethernet devices.

The ComNet™ CNFE6+2USPOE provides 8 Ethernet ports operating at 10/100Mbps and is designed to combine six electrical ports into a second optical port that forwards this data to the next CNFE6+2USPOE. The optical ports are designed to forward the data from the six electrical ports to the next switch, to a PC, or another Ethernet connection. In addition, the electrical ports can supply up to thirty (30) watts of power (“Power Over Ethernet”) to remote Ethernet devices.

ComNet CWFE1POCOAXBM supports 100Mbps Ethernet transmission as well as Power over Ethernet (PoE) over standard 75 ohm coaxial cable circuits, at data rates of up to 100 Mbps, and transmission distances of up to 230 meters. CWFE1POCOAXBM is installed at the powered device (PD) in the field location. LED indicators are provided for rapidly ascertaining the operating status of the device.

The ComNet™ CWGE2FE8MSPOE managed ethernet switch provides transmission of (8) 10/100 BASE-TX and (2) 10/100/1000TX or 100/1000FX combo ports. These units are available for use with either conventional CAT-5e copper or optical transmission media. The 8 electrical ports support the 10/100 Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation.

The comnet™CNFe5SMspoe is a five-port self-managed ethernet switch with uplink management functionality.  It provides 5 ports operating at 10/100Mbs and is designed to combine ethernet data from the four electrical ports into a fifth electrical port and forward that data to the next network device.

The ComNet™ CNGE2FE8MSPOE+ is a hardened managed Ethernet switch. It provides IEEE 802.3at (30W) PoE+ to eight 10/100BASE-T(X) and has two-gigabit combination SFP or RJ-45 ports. Up to 240 watts of PoE or PoE+ power is available for distribution across all 8 TX ports. All SFP ports utilise ComNet SFP modules for fiber and connector type and distance. The CNGE2FE8MSPOE+ is a redundant switch offering multiple Ethernet redundancy protocols, C-Ring.

The ComNet™ CNGE2FE8MSPOE2 is a hardened Managed Ethernet Switch.It provides IEEE 802.3af (15W) PoE to eight 10/100BASE-T(X) ports and has two-gigabit combination SFP or RJ-45 ports. Up to 120 watts of PoE power is available for distribution across all 8 TX ports. All SFP ports utilize ComNet SFP* modules for fiber and connector type and distance. The CNGE2FE8MSPOE2 is a redundant switch offering multiple Ethernet redundancy protocols, C-Ring (recovery time <10ms over 250 units of connection), ComRing, and MSTP/RSTP/ STP (IEEE 802.1 s/w/D).

The ComNet™ CNGE2FE16MS managed Ethernet switch provides robust transmission of (16) 10/100 BASE-TX and (2) 10/100/1000TX or 100/1000FX combo ports, of gigabit Ethernet data. Unlike most Ethernet switches, these environmentally hardened units are designed for direct deployment in difficult out-of-plant or roadside operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media.

The ComNet™ CWGE26FX2TX24MSPOE is an extended temperature commercial grade Managed Ethernet Switch. It provides IEEE 802.3at PoE to twenty-four10/100/1000BASE-T(X) two of which are also gigabit combo ports supporting 100/1000Fx SFP Modules. A further two-100/1000FX SFP* ports are also included.

The ComNet™ CNGE28FX4TX24MSPOE+ Layer 2 Managed 28 port ethernet switch supports twenty-four (24) 10/100/1000 Base-TX ports and four (4) 1000Base-FX ports of Ethernet data. Fully compliant with IEEE 802.3at, up to 720 watts of PoE or PoE+ power is available for distribution across all 24 Base-TX ports. The exclusive C-Ring redundant ring feature protects networks from interruptions or temporary malfunctions with its fast recovery technology. Legacy ring allows the switch to be used in an existing ring of ComNet X-Ring enabled switches. eConsole, a powerful, easy-to-use Windows-based utility, allows the CNGE28FX4TX24MSPOE+ to be centrally managed.

The ComNet™ CNGE2FE8MSPOE Managed Ethernet Switch provides eight (8)10/100 BASE-TX ports and two (2) 10/100/1000TX or 100/1000FX combo ports. The CNGE2FE8MSPOE is environmentally hardened and designed for use in difficult environments, and is available for use with CAT-5e copper or optical transmission media. The 8 electrical ports support the 10/100 Mbps IEEE 802.3 protocol.

The ComNet CNFEMCPOE Ethernet media converter is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP* modules. These models require the ordering of sold-separately interchangeable SFP modules for fiber type, distance and connectors.

The ComNet CNMCSFP electrical-to-optical Ethernet media converters accept a 10/100 or 1000 Mbps electrical input and converts this to a 100 or 1000 Mbps optical output (selected by a dip switch) and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output. “Auto-Negotiating" is supported on the copper interface side.

ComNet CNMCSFPPOE/M mini ethernet media converter accepts a 10/100 or 1000 Mbps electrical input and converts this to a 100 or 1000 Mbps optical output (selected by a dip switch) and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output. “Auto-Negotiating” is supported on the copper interface side. The device uses either one or two optical fibres, depending upon the selection of SFP optical module.

ComNet CNFE2MCPOEM mini ethernet media converter with PoE is designed to transmit and receive 10/100 Mbps data over optical fiber through user selectable SFP modules. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. It is environmentally hardened to operate in extreme conditions.

ComNet CLFE8IPS is a 8 port high-power PoE mid-span injector. It is compatible with 10/100/1000 BaseT Ethernet networks. The injector meets IEEE 802.3af and IEEE 802.3at standards and deliver up to 37W per port simultaneously on all ports without requiring power management. The PoE function can be set up with Windows GUI or use the default plug and play option. This mid-span power injector is equipped with LEDs to provide operational status.

The  comNet copperLine  CLFE(X)IPS model is 1RU high and can be easily installed in 19" racks.  This is ideal  for a wide range of cctV or It applications that require high power such as IP cameras, wireless access points or VoIP to be connected to a central LaN switching fabric with ease.

ComNet CNGE2MCPOEM 2 port ethernet media converter is designed to transmit and receive 10/100/1000 Mbps data over optical fibre through user selectable SFP modules. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 1000 Mbps. It is environmentally hardened to operate in extreme conditions. The LED indicators are provided for confirming equipment operating status.

The ComNet™ CWFE100(X)POE/M Series 2-port media converters provide full-duplex fiber optic transmission of a single channel of 10/100 Mbps Ethernet data (10/100 BASE -TX) through multimode or single mode optical fiber.

The ComNet CWFE1COA XPOE /M supports 100Mbps Ethernet transmission as well as Power over Ethernet (PoE)at data rates of 100Mbps, and transmission distances of up to 305 meters (1000 feet).

The ComNet™ CNFE4SMSPOE is a four-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100Mbs and is designed to combine Ethernet data from the three electrical ports into a fourth electrical port and forward that data to the next network device. There is no programming required to use this product.

ComNet™ CWPOEIPS-15 is a low-cost power over Ethernet (PoE) midspan injection module that injects 48 VDC at 0.3 amperes to the unused pairs of any UTP or STP CAT-3, CAT-4, or CAT-5 network cable. Operating power and 10/100TX Ethernet data are easily combined on one cable, eliminating the need to install additional power outlets and electrical cabling. Housed in a compact, rugged, light-weight package, and utilising a completely self-contained 100 to 240 VAC input power supply, the CWPOEIPS is fully compliant with the requirements of IEEE 802.3af for Power Sourcing Equipment (PSE), and features autodetection of powered devices (PDs).