Axis Communications IP security solutions

Designed for PTZ and multi-sensor cameras Room for connectivity devices, midspans (not included) and service loop Protection against impacts, water, dust and corrosion Pre-mounted IP66 RJ45 connector Re-use existing holes

An aluminium wall mount suitable for Axis positioning cameras and positioning units Compatible with Axis ACI 3/4” conduit adapters, and offers six cable entries Cables can be routed through the back or, by using a conduit connection, from each side or from the bottom For indoor and outdoor use Impact-resistant (IK10)

An aluminium parapet mount, which includes AXIS T94A01D Pendant Kit (only used in combination with PTZ cameras) and AXIS T91A6 Pipe Seal Also compatible with Axis pendant kits with 1.5” NPS inner thread, and Axis ACI 3/4” conduit adapters The cables can be routed through the back, or from the side by using a conduit connection For indoor and outdoor use Vandal resistance with IK10

Designed for both indoor and outdoor use Available in two versions with different lengths of marine-grade (SS316L) stainless steel straps One version for poles with diameter between 50–150 mm (2–6 in), and one for poles with diameter between 100-410 mm (4–16 in) in diameter Compatible with Axis fixed dome or fixed bullet cameras

Made for parapet and wall installations when the requirement is to place the camera further out from the wall Its ability to swivel 180 degrees on its own axis, allows for easy and safe mounting/maintenance of the camera from a rooftop Intended for outdoor fixed and PTZ dome cameras supporting 1.5” NPS thread Corrosion protected

Designed for discreet installation in drop and overhang ceilings Compatible with the bullet cameras from AXIS M20 Network Camera Series Applicable for indoor environments as well as outdoor use in soffits Also suitable for installation in air-handling (plenum) spaces as the enclosure is made of metal alloy with a 1/2” (M20) conduit hole for protected cable routing

Cost-effective mount for Axis fixed dome cameras Recessed ceiling installation made quick and easy Enables sleek and discreet video surveillance

Designed for Axis PTZ and multi-sensor cameras Flexible installation using the IDC connector Built-in IP66 RJ45 connector Suitable for wall and pole mounting- Protection against impact, water, dust and corrosion

An industrial grade, 1-port midspan offering an easy, fast, and cost-effective solution for powering network products Wide compatibility with Axis PoE devices Plug-and-play 60 W Power over Ethernet Wide temperature range -40 °C to 75 °C (-40 °F to 167 °F) Dual DC inputs 20 - 60 V DC

Compliant with IEEE 802.3at and 802.3af Support for Axis PTZ domes Plug-and-play Can be installed on a wall, shelf or DIN rail with an accessory DIN clip

Injects power and data to the network device with built-in PoE support Supports 8 network devices at the same time for cost-effective installation Delivers up to 15.4 W per port and is IEEE 802.3af compliant, which ensures compatibility with most of Axis network products that have built-in support for PoE

Aluminium ceiling bracket for Axis PTZ cameras and AXIS Q37 Series for indoor or outdoor use 3/4" conduit hole on the side

IEEE 802.3af or IEEE 802.3at compliant Can be used with all Axis network products that have built-in support for PoE Can be installed on a wall, shelf or DIN rail with an integrated DIN-clip

Injects power and data to the network device with built-in PoE support Supports 16 network devices at the same time for cost-effective installation Delivers up to 15.4 W per port and is IEEE 802.3af compliant, which ensures compatibility with most of Axis network products that have built-in support for PoE

Designed for discreet installation in drop and overhang ceilings Compatible with AXIS P32-VE/-LVE, AXIS P33-VE/-LVE and AXIS Q35-VE/-LVE network camera models Applicable for indoor environments as well as outdoor use in soffits Also suitable for installation in air-handling (plenum) spaces as the enclosure is made of metal alloy with a 3/4“ (M25) conduit hole for protected cable routing

Outdoor-ready, IP66- and NEMA 4X-rated Compatible with AXIS Q60-E and AXIS Q61-E PTZ Cameras Offers surge protection for both the AC and the PoE ports ensuring protection to the equipment from outdoor surges IEEE 802.3at compliant

Aluminium corner mount for indoor and outdoor use Compatible with AXIS fixed cameras, thermal cameras, PTZ cameras, and fixed dome cameras

Delivers 30 W and is IEEE 802.3at compliant, which ensures compatibility with most of Axis network products with built-in PoE Can be installed on a wall, shelf or DIN rail with an accessory DIN clip

A compact, plug-and-play media converter with PoE With its integrated power supply, it minimises the amount of cabling and facilitates installation Offers data input through SFP or RJ45, and delivers High PoE 60 W Works with all Axis network products supporting Power over Ethernet

A compact and flexible solution for PoE-based network devices Injects power and data to the network device with built-in PoE support Delivers up to 15.4 W and it is IEEE 802.3af compliant and, which ensures compatibility with most of Axis network products that have built-in support for PoE

A small form-factor pluggable (SFP) transceiver that supplies network devices, such as a switches or routers, with a network connection Up to 100 m link length Link-loss feature Industrial grade – extended temperature range Integrated RJ-45 connector Complies with SFP MSA and IEEE802.3

A small form-factor pluggable (SFP) transceiver that supplies network devices, such as a switches or routers, with a fibre optic network connection Long wavelength (1,310 nm) FP laser diodes enable data transmission up to 10 km on a single-mode 9/125 μm optical fibre Link-loss feature Industrial grade – extended temperature range Complies with SFP MSA

IEEE 802.3at compliant Support for Axis PTZ domes Plug-and-play Can be installed on a wall, shelf or DIN rail with an accessory DIN clip

A small form-factor pluggable (SFP) transceiver that supplies network devices, such as a switches or routers, with a fibre optic network connection Industrial grade with a wide temperature range Includes link-loss that enable network redundancy Complying with SFP Multisource Agreement (MSA), it is easy to install into compliant ports at any time without interrupting the online operation of the host equipment Short wavelength (850 nm) VCSEL laser diodes enable data transmission up to 550 m on a multimode 50/125 μm optical fibre

Input voltage: 90 - 265 V AC Output voltage: 44 – 57 V DC Max current: 0.7 A Compatible with AXIS PoE extenders and PoE+ over Coax

Delivers 30 W and is IEEE 802.3af compliant, which ensures compatibility with most of Axis network products with built-in PoE Ensures safe and reliable operation in outdoor environments Offers surge protection for both the AC and the PoE ports ensuring protection to the equipment from outdoor surges

Aluminium mounting bracket Compatible with AXIS fixed cameras and fixed dome cameras

Includes power-efficient, long-life 850 nm IR LEDs with a range of reach of 50 m (164 ft) Enables cost-efficient surveillance in pitch darkness An optional IR kit accessory designed to fit AXIS P1375-E Network Camera Robust with IK10 and IP66 rating Easy installation