Axis Communications has strengthened its network video camera portfolio with the introduction of ‘Active Tampering Alarm'. Active Tampering Alarm is an intelligent video feature built into network cameras that enables security staff to detect disrupted camera operation, by automatically alerting the operator when a camera is re-directed, obscured or manipulated.
Benefits at a glance:
Active Tampering Alarm is available now in the following Axis network cameras: AXIS 209FD-R, AXIS 221, AXIS 223M and AXIS 225FD.
Watch the Active Tampering Alarm movie
Make | Axis Communications |
---|---|
Manufacturer | Axis Communications |
Model code | AXIS 209FD-R |
Chip Inch Size | 1/4 inch |
Colour Type | Colour |
Resolution TVL | 640 x 480 |
Dome Type | Fixed Focus |
Sensitivity lux | 1.5 |
Digital (DSP) | Yes |
Indoor/Outdoor | Indoor/Outdoor |
Mount Type | Ceiling, Wall mount |
Focal length | 3.0 |
Rotation Angleso | +/-10 pan, 0 ~ 90 tilt |
Compression | M-JPEG, MPEG-4 |
White Balance | Yes |
Electronic Shutter range | 1/4 ~ 1/10,000 |
Signal Mode | PAL/NTSC |
Network Properties |
Network Protocols: IPv4/v6, HTTP, HTTPS, FTP, SSL/TLS, TCP, ICMP Image Frame Rate: 30 fps |
Electrical Specifications | Power Consumption: 3.84 W |
Physical Specifications |
Dimensions mm: 39 x 102 x 100 Weight g: 180 |
Environmental Specifications |
Operating Temp oC: -20 ~ +50 Protection: IP66 |
System Requirements |
Operating System: Windows XP, 2000, DirectX 9.0 or later Web Browser: Internet Explorer 6 Hardware and System related properties: Pentium III CPU 500 MHz, 128 MB RAM |
Additional info |
Multiple user access levels with password protection. 20 simultaneous users. Unlimited number of users using multicast (MPEG-4). Overlay capabilities: time, date, text, image or privacy mask |