Vanderbilt Security devices

Vanderbilt (formerly known as Siemens Security Products) KEY NO:01 is a RTP key for housing.

The Siemens End of Line board, AO-PE01 is the most flexible solution for 2-wire installations with and without end of line resistor. The same board is suitable for ADM-xxx detectors with and without antimask function. Different resistor values are selectable by DIP switch.

Siemens Vectis HX NVS 32 is a network video surveillance package that is suitable for use with network cameras, video transmitters and digital video recorders. It has the ability to control, monitor, record and playback network video streams seamlessly.

Siemens Vectis HX NVS 8 is a network video surveillance package that is suitable for use with network cameras, video transmitters and digital video recorders. It has the ability to control, monitor, record and playback network video streams seamlessly.

This tamper kit can be used with the DC22, SR34i, SR35i and ACC-Lite. It triggers a tamper alarm in the system if the controller is removed from the wall.

Vanderbilt (formerly known as Siemens Security Products) 3CT-C is a configuration card. These are pre-configured to work with 3CT.

Heater for IS443, IS444 and IS445 beams. Special low voltage heater for beams. Power supply 24 VDC / 860 mA. Weight 82 g. Packing unit 1 pair per carton.

Vanderbilt (formerly known as Siemens Security Products) Vectis HX NVS 16 is a network video surveillance package that is suitable for use with network cameras, video transmitters and digital video recorders. It has the ability to control, monitor, record and playback network video streams seamlessly.

Wall mount bracket for fixed dome cameras:Analogue: CFVC1317-LP, CFVS1317-LP, CVVC1317-LP, CVWC1325-LX, CVVS1317-LPIP: CFIS1425, CFMW1025 , CFMS2025, CVMS2025-IR

Vanderbilt (formerly known as Siemens Security Products) SPCY520 is a flush mounting kit which allows a discrete installation of the SPCK52x Compact Keypad. This kit allows the keypad to be recessed into the wall, providing a sleek, elegant appearance. It can be used with SPCY521 for installation in concrete walls, or on its own for plasterboard walls.

Vanderbilt (formerly known as Siemens Security Products) SPCY521 is a metal back box for flush mounting the SPCK52x compact keypad into concrete walls. It allows the compact keypad to be installed flush into the wall, providing a slim and elegant appearance with full tamper protection.

The IRS272 black curtain mirror has overlapping coverage zones forming a complete monitored area to detect persons passing through. 15 m curtain for the IRO840T. 25 m curtain for IR270, IRM270 and IR160W6.

Suitable for IR100, IR120, IRM120, IR270, IRM270 and IR160W6. With the IRUM20 the detectors can be swivelled into special positions for wall mounting applications.

The SPCK521.100-N Compact Keypad is slim, stylish and feature packed. With touch key technology, the 4 soft keys and navigation keys allow easy operation with a minimum number of steps. Status information and ‘next step’ prompts are clearly displayed on the large LCD. The integrated speaker enhances the user experience with audio annunciation.Support for EM and Mifare card technologies are provided by integrated readers allowing for quick user authentication.Customer logo, emergency or quick set functions can be displayed in idle state. Various mounting options and accessories provide a complete keypad interface.

Vanderbilt Vectis iX48 NVS  is a network video software that supports network-based video monitoring and recording of up to 64 IP cameras. It delivers a unique combination of industry leading performance and unrivalled compatibility. It records full-HD images from up to 64 cameras simulataneously at 25 frames per second and supporting resolutions of up to 20 megapixels.

SH3 is a protective cover for BM3, BM31 and BM3. There are cuttings for cables to simplify the process of adding it to an existing installation.

Vanderbilt (formerly known as Siemens Security Products) ACK5100 is used to create a serial connection between a PC and the AC5100 advanced central controller for configuration.

Vanderbilt Vectis iXUN CMS is a centralised management software which manages up to 300ch cameras and displays. It features synchronous playback, multicast, tour, Region of Interest, video motion detection and video export function which allows users to easily manage and control surveillance system.

SH2 is a protective cover for K42, K44Duo, M43, PP500-EM and PP500-Cotag. There are cuttings for cables to simplify the process of adding it to an existing installation.

Siemens is CHHM2310 230 VAC heating kit for camera housings.

The GMXP3 / GMXP3Z lock protection is used in conjunction with a GM7xx seismic detector to monitor safe and strong room doors with exposed keyholes. A micro-switch fitted in the swivel plate monitors every movement of the swivel arm and triggers an alarm when unauthorized access is attempted. The swivel arm is made from hardened steel and fully covers the keyhole when the system is armed. When the system is disarmed, the swivel arm can easily be rotated by 90° to enable unimpeded access to the keyhole.The GMXP3 can be used for lock roses that protrude up to 4mm. The Z shaped swivel arm of the GMXP3Z allows installations on even larger lock roses that protrude up to 24mm.

ACT ACTsmart2 1070 is a proximity reader. It can be a standalone, connected together in a master-slave configuration or networked through a PC. The reader is in one combined unit, saving significant installation time and cost.

Vanderbilt (formerly known as Siemens Security Products) 3CT-kit is a configuration card creation kit that includes 3CT Software, the 3CT encoder and 3CT configuration cards. All needed to create configuration cards for the ARxxS-MF readers.

Vanderbilt Vectis iX64 NVS  is a network video software that supports network-based video monitoring and recording of up to 64 IP cameras. It delivers a unique combination of industry leading performance and unrivalled compatibility. It records full-HD images from up to 64 cameras simulataneously at 25 frames per second and supporting resolutions of up to 20 megapixels.

Vanderbilt (formerly known as Siemens Security Products) 633-2 is a cotag programmer that enables individual requirements for programming active and passive Cotag cards and tags. It makes it possible to program small batches or individual cards and can be used to create configuration cards to set up any Cotag readers. The programmer can also be configured for an end user‚ so that the customer himself has local control over card issuing.

The GMXS1 test transmitter is part of the test system for the GM7xx range of seismic detectors. It is installed in direct proximity to the detector and used for function and mounting test of a single seismic detector prior to system arming.

Vanderbilt (formerly known as Siemens Security Products) TG-Cotag USB is an enrolment reader kit for cotag cards and tags.

SH1 is a universal protective cover for card readers. It is recommended for outdoor installations.