Vanderbilt Security devices

Vanderbilt CCDA1425-WPHSB smoked bubble for exchange with the standard clear bubble that is delivered with the weatherproof outdoor housing CCDA1425-WPH.

Clear lower dome for exchange with the standard tinted bubble that is delivered with the vandal-resistant dome.

Spare wiper arm assembly for a CAHL4010-WK and CAHL4011-WK wiper kit. Wiper kits are available as an accessory for CHSL4010 and CHSL4011 camera housings.

Tinted bubble for exchange with the standard clear bubble that is delivered with the indoor ceiling surface mount CCDA1425-SM.

Vanderbilt CCDA1425-EP extension pole increases the length of wall and pendant mounts by 0.5 m. For use with CCDA1425-WM, CCDA1425-WMJ and CCDA1425-PM.

Siemens CHHA2410 is a heater kit for CHSM2510 and CHSL2610 housings.

Clear bubble for exchange with the standard tinted bubble that is delivered with CFVB1415, CFVC1415, CFVS1415, CFVC1317, CFVS1317 indoor varifocal domes or replacement of the clear bubble that is delivered with CFFB1310, CFFB1315, CFFC1310, CFFC1315, CFFC1317 indoor fixed domes.

This power supply is available as an accessory for camera housings and the VK-3 Keyboard.

Tinted bubble for exchange with the standard clear bubble that is delivered with CFVB1415,CFVC1415, CFVS1415, CFVC1317, CFVS1317 indoor fixed domes or replacement of the clear bubble that is delivered with CFFB1315, CFFC1310, CFFC1315, CFFC1317 indoor fixed domes.

Vanderbilt 4887 CCTV manager module provides CCTV system control directly from within Granta via a virtual keyboard. Further‚ as Granta monitors events within the access control system it can send commands via RS232 directly to the CCTV system without operator intervention‚ which is very useful for alarm events.

The 4885L makes it possible to produce integrated photo ID badges. Cardholder photos can either come directly from a connected digital camera or from a database of electronically stored images. The badge design software enables to combine the cardholder photo with the company logo‚ as well as text and database fields.

Vanderbilt (formerly known as Siemens Security Products) KEY NO:06 is a RTP key for housing.

The Siemens 812-3 cable is 300 meters long and meets the low smoke/zero halogen specification. It consists of three screened twisted pairs and 9 other cores for the complete connection of one door to a Granta system controller.

The heating kit is needed for temperatures below 0 degrees.

The 812-1 cable is 100 meters long and meets the low smoke/zero halogen specification. It consists of three screened twisted pairs and 9 other cores for the complete connection of one door to a Granta system controller.

Vanderbilt (formerly known as Siemens Security Products) LOCK&KEYS 01 is a RTP lock and key

Vanderbilt (formerly known as Siemens Security Products) SPACER/4 MM is a spacer plate for gap between keyhole and GMXP3/GMXP3Z flange.

The Siemens End of Line board, AO-PE02 is the most flexible solution for 2-wire installations with and without end of line resistor. The same board is suitable for ADM-xxx detectors with and without antimask function. Different resistor values are selectable by DIP switch.

Vanderbilt CHBA0111 is an aluminium adapter to enable the CHBC2010 and CHBS2310 housing wall mount to be fitted to a corner. It is provided complete with stainless steel fixtures to attach the adapter to a corner and the mount to the adapter.

Vanderbilt Vectis iX08 NVS is a network video software that supports network-based video monitoring and recording of up to 64 IP cameras. It allows connectivity to more than 1000 camera models using combined ONVIF and SDK compatibility.

Vanderbilt (formerly known as Siemens Security Products) KEY NO:01 is a RTP key for housing.

The Vanderbilt (formerly known as Siemens Security Products) SPACER/2 MM is a spacer plate for gap between keyhole and GMXP3/GMXP3Z flange.

The installation telescope ISTC41 can be used for easy alignment of the surveillance zone and to set the sensitivity at the point of installation. Weight 0.320 kg.

SH4 is a protective cover for BC615 and BC43. There are cuttings for cables to simplify the process of adding it to an existing installation.

Vanderbilt (formerly known as Siemens Security Products) CVMA-MIP flush mount kit for Analogue and IP fixed dome cameras.

BB4 is a flush-mounting kit designed to provide an unobtrusive and aesthetically appealing installation of the BC615 Magstripe and the BC43.

Vanderbilt Vectis iX32 CMS is a centralised management software which manages up to 300ch cameras and displays. It features synchronous playback, multicast, tour, Region of Interest, video motion detection and video export function which allows users to easily manage and control surveillance system.