Vanderbilt Security devices

The SPCV341.000 Audio Expander extends the SPC system via X-BUS with an audio verification zone, 4 wired zones and 1 line output to drive an external audio pre-amplifier. The built in microphone and speaker allow pre- / post-event audio recording and live audio (listen / talk) between ARC/CMS and the SPC system. Up to 3 audio satellites (SPCV310/410) can be connected to the expander.

Vanderbilt (formerly known as Siemens Security Products) SPCV320.000 audio expander extends the SPC system via X-BUS with an audio verification zone, 4 wired zones and 1 open collector output. The built in microphone and speaker allow pre- / post-event audio recording and live audio (listen / talk) between ARC/CMS and the SPC system. Up to 3 audio satellites (WAC11 speaker / microphone, WAS11 microphone) can be connected to the expander.

Encoder reader for 3CT.Connected to your PC via USB-port.

Vanderbilt (formerly known as Siemens Security Products) SPCW112.000 SiWay RF-module for standard LCD keypad extends the SPC system with a wireless access point for Intrunet wireless detectors and remote controls within reception range. The wireless module plugs directly on the keypad main PCB.

Vanderbilt (formerly known as Siemens Security Products) SPCW111.000 SiWay RF-module extends the SPC control panel with a wireless access point for Intrunet wireless detectors and remote controls within reception range. The wireless module plugs directly on the main PCB of compatible SPC panels with plastic housing / cover.

Vanderbilt (formerly known as Siemens Security Products) SPCW130.100 SiWay RF-expander is connected to the X-BUS and provides a wireless access point for the Intrunet wireless detectors and remote controls linked to the system.The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

The SPCE120.100 is a universal display expander with 16 tri-color LEDs, 4 keys, integrated card reader and buzzer. In linked mode with a keypad the LEDs indicate the status of 4 areas in one glance and the areas can be directly set or unset with the assigned function keys. In flexible mode the freely programmable user interface indicates the configured status information with LEDs (e.g. open zones, area setting states) and enables activation of application specific processes by pressing the assigned function keys (e.g. setting of an area, open or close a gate). With the integrated card reader the indication or operation can be enabled for authorised users only by presenting a valid proximity card. The expander also provides one freely programmable zone which can be configured for different zone monitoring requirements.

The SPCE452.100 expander extends the SPC system via X-BUS with 8 fully programmable relay outputs. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander comes in a plastic housing with front and back tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

InfoPoint is used as a reservation terminal for SiPass Entro and has an integrated function to send and receive information from/to the segment controller (acting as a web server). The InfoPoint uses TCP/IP and works similarly to a web browser in a PC. The terminal includes a color screen and keys for navigating. InfoPoint also has a Cotag proximity reader to identify the person who wants to use the unit.

The Vanderbilt (formerly known as Siemens Security Products) fast programmer SPCX410.000 provides a simple method of transferring configuration files from a PC (USB) to an SPC panell via the SPC Pro application, in addition to backing up configuration files from an SPC panel to the fast programmer, without a direct PC connection. This portable device has on-board 1 MB flash memory, which typically can store in excess of 100 configuration files or a new firmware release (subject to file size) for on site controller firmware update.

The SPCN910.000 is an interface module which will enable the SPC control panel to support secure alarm signaling services offered within the UK. A range of 3rd party single & dual path communication devices, offered by UK market leaders in the provision of these services, can be easily connected to the module & placed within SPC G2 & G3 cabinets.

The SPCE652.100 expander extends the SPC system via X-BUS with 8 wired zones and 2 fully programmable relay outputs. The zones and outputs on the expander function exactly as the zones and outputs on the SPC panel. Each zone can be configured for different zone monitoring requirements. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander comes in a plastic housing with front and back tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

The SPCE651.100 expander extends the SPC system via X-BUS with 8 analysed zones and 2 fully programmable relay outputs. Analysed zones allow to connect inertia sensors. The zones and outputs on the expander function exactly as the zones and outputs on the SPC panel. Each zone can be configured for different zone monitoring requirements. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

Siemens CCDS1425-XTU dome controller is an optional control unit (XTU) for preparation of the subsequent installtion of a Solaris dome.

The SPCV340.000 Audio Expander extends the SPC system via X-BUS with an audio verification zone, 4 wired zones and 1 open collector output. The built in microphone and speaker allow pre- / post-event audio recording and live audio (listen / talk) between ARC/CMS and the SPC system. Up to 3 audio satellites (SPCV310/410) can be connected to the expander.

Vanderbilt (formerly known as Siemens Security Products) IPAW8-10 wireless personal alarm transmitter provides the user with additional security and comfort functions. One function can be programmed to any of the 3 buttons or the combination of it.

Vanderbilt (formerly known as Siemens Security Products) IPAW6-10 one button personal alarm for elderly people, can also be used to operate any device. It can be worn as wrist watch or as a pendant by using a lanyard. It is a wireless personal alarm button.

The SPCA210.100 2-door expander extends the SPC controller with advanced door control functionality for 2 entry doors or 1 entry/exit door. The device features 2 Wiegand/Clock&Data interfaces, 4 LED control outputs (1 void / valid per reader), 4 zones (1 position- and 1 opening switch per door), 2 relay outputs (1 lock per door) and an on-board buzzer to signal "door open too long" events.To allow greatest flexibility, the zones and outputs are freely programmable for other purposes if not used for door control. Up to 512 priority card holders can be stored on the expander for standalone operation in case of communication loss to the control panel. The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.

Siemens 3CT A is a configuration card creation tool software.

Vanderbilt (formerly known as Siemens Security Products) SPCW110.000 SiWay RF-kit for panel extends the SPC control panel with a wireless access point for Intrunet wireless detectors and remote controls within reception range. The wireless module plugs directly on the main PCB of compatible SPC panels with metal housing. The kit also includes a stub antenna to be mounted on metal housings.

MAGIC motion detector PDM-I18 is impressive with its modern and elegant design. Its style is suitable for all installation situations. Together with the enhanced Visatec algorithm, its patented MAGIC mirror provides reliable detection of intruders and the highest false alarm immunity. Flexible installations can be carried out quickly and error-free due to features like Auto Walktest and new End-of-Line concept (EoL).

Vectis AX/HX Keyboard is a network system controller which controls both analog and network devices. This unique feature is a newly introduced concept into the video surveillance market providing flexibility and scalability for control centers by supporting various components like DVRs and PTZ cameras. And also, its ergonomic and compact design will enhance the usability making operators feel comfortable

The SPCK620.100 comfort keypad is ideal to operate single area and multi area applications in a user friendly way. The 4 soft keys and the multi dimensional navigation key allow an easy operation with a minimum of operation steps. Status information and ‘next step’ prompts are clearly displayed on the large LCD. Customer logo, emergency or quick set functions can be displayed in idle state. The functionality can be enhanced with the SPCE110 key switch expander or the SPCE120 indication expander.

Vanderbilt CMTC4225 is a full HD TFT-LCD LED monitor that is suitable for CCTV applications and also for use with digital video recorders and PC systems. It has very high contrast ratio and brightness combined with a large viewing angle. In addition, there is a graphical OSD menu in 7 languages and a remote control that makes the monitor user friendly.

Siemens CADL0500 is an alarm module for telemetry receiver.

The SPCN110.000 PSTN module (up to 56K) is compatible with the complete SPC panel range and plugs directly on the main PCB removing the need for any additional wiring. The modem can take control of the line and communicates with a central station (ARC) using common format protocols (SIA, Contact ID). It also supports PPP connection to SPC Pro software for remote programming and configuration up-/download. The PSTN modem can be used as the primary source of communication or as backup to GSM modem.

Vanderbilt CMTC1943 is a high resolution TFT-LED monitor. It has is designed specifically for CCTV applications. It is also suitable for use with digital video recorders, PC systems or direct connection to analogue cameras. In addition, the monitor is equipped with anti-glare plastic front screen that makes the design more robust against dust and shock.

The SPCE110.100 is a universal key switch expander with 2 tri-color LEDs, a 3-position key switch and buzzer. The freely programmable user interface indicates the configured status information with LEDs (e.g. key switch position, area setting states) and enables activation of application specific processes by changing the key switch position (e.g. unlock keypad or indication expander, setting of an area, open or close a gate). The expander also provides one freely programmable volt free relay output with either NO or NC terminal.