Vanderbilt Power Supplies

The 4910 power supply can power up to five Granta controllers (not including electric door releases or third-party readers). It has a 12 VDC 5 A rating and provides battery backup in case of a power outage.

Siemens' CCDS1415-RTU is a remote termination unit for local power supply of the Solaris dome camera. The RTU allows the XTU to be installed at a distance of up to 300 m from the dome camera.

The SAP14 external power supply includes a bus-monitored 12 V DC / 1.3 A switched supply, 4 fused 12 V outputs and a freely programmable relay output with 48 V / 5 A. The housing offers additional space for 4 SMT12 / SMR11 boards and either a 17 Ah battery or a 7.2 Ah battery with 2 SMX13 relay boards.

A single door cloud IP controller with 2 Amp 12 V DC power supply unit Manages access control and video from one interface Monitors live video stream and reviews recorded video associated with events and doors Manages and controls access from anywhere, at any time and on any device (PC, Tablet, smart phone) with a modern web browser Automatic notification on critical door events, voltage problems, break glass, tamper Live Muster reporting Dual port Ethernet switch, allows for IP connection Fire Override Airlock/Interlock TCP / IP - DHCP / Static IP addresses Compatible with all ACT readers Set/Unset alarm panel from ACT365 reader, Web portal or Mobile app

A single door cloud IP controller with PoE++ power supply unit Dual port Ethernet switch, allows for a max of 4 hubbed controllers 60,000 Users Compatible with all ACTpro systems Mains present (Line voltage) Monitoring Emergency Door Release (EDR) / Breakglass Monitoring or Deadbolt monitoring Tamper monitoring Faults reported in ACT Enterprise software Anti-Passback Fire Override Airlock/Interlock Arm/Disarm intruder panel Elevator control TCP / IP - DHCP / Static IP addresses Extra rights and door plans included Bluetooth mobile credential support via OSDP or Wiegand bluetooth readers

A single door cloud IP controller with 2 Amp 12 V DC power supply unit in a metal enclosure Dual port Ethernet switch, allows for a max of 4 hubbed controllers 60,000 Users Compatible with all ACTpro systems Mains present (Line voltage) Monitoring Emergency Door Release (EDR) / Breakglass Monitoring Tamper monitoring Faults reported in ACT Enterprise software Anti-Passback Fire Override Airlock/Interlock Arm/Disarm intruder Panel Elevator Control TCP / IP - DHCP / Static IP addresses Extra rights and door plans included Supports OSDP, Wiegand and Clock & Data readers

Single indicator (mains on) power supply. The output is full current to load and is exclusive of the battery charging facility

Multi indicator (mains on & fault) power supply. The outputs are full current to load and are exclusive of the battery charging facility.

Multi indicator (mains on & fault) power supply. The outputs are full current to load and are exclusive of the battery charging facility and are available im small and large boxes

Multi indicator (mains on & fault) power supply. The outputs are full current to load and are exclusive of the battery charging facility

Multi indicator (mains on & fault) power supply. The outputs are full current to load and are exclusive of the battery charging facility.

Convienient DIN rail mounting Ingress protection to IP40 Cable connection shrouds for user safety Self extinguishing plastic housing Output protection Cable access via 12mm knockout Double insulated

A single door cloud IP controller with 2 Amp 12 V DC power supply unit Dual port Ethernet switch, allows for a max of 4 hubbed controllers 60,000 Users Compatible with all ACTpro systems Mains present (Line voltage) Monitoring Emergency Door Release (EDR) / Breakglass Monitoring or Deadbolt monitoring Tamper monitoring Faults reported in ACT Enterprise software Anti-Passback Fire Override Airlock/Interlock Arm/Disarm intruder panel Elevator Control TCP / IP - DHCP / Static IP addresses Extra rights and door plans included Bluetooth mobile credential support via OSDP or Wiegand bluetooth readers

Convienient DIN rail mounting Ingress protection to IP40 Cable connection shrouds for user safety Self extinguishing plastic housing Output protection Cable access via 12mm knockout Double insulated

Convienient DIN rail mounting Ingress protection to IP40 Cable connection shrouds for user safety Self extinguishing plastic housing Output protection Cable access via 12mm knockout Double insulated

Converts open collector outputs to volt free contacts Wide operating voltage range Low current consumption Discrete and compact

Converts open collector outputs to volt free contacts Wide operating voltage range Low current consumption Discrete and compact

Power supply for 12 V DC systems Space for 1 x 18Ah batteries Voltage-in-Parallel (ViP) mode Capable of parallel connection for increased capacity & reliability Short circuit & overload potection Mains failure detection Monitors for three different battery faults LED confirmation of fuse failures Deep discharge protection for the batteries Internal & automatic battery testing function

Power supply for 12 V DC systems Space for 1 x 18Ah batteries Voltage-in-Parallel (ViP) mode Capable of parallel connection for increased capacity & reliability Short circuit & overload potection Mains failure detection Monitors for three different battery faults LED confirmation of fuse failures Deep discharge protection for the batteries Internal & automatic battery testing function

Power supply for 12 V DC systems Space for 1 x 18Ah batteries Voltage-in-Parallel (ViP) mode Capable of parallel connection for increased capacity & reliability Short circuit & overload potection Mains failure detection Monitors for three different battery faults LED confirmation of fuse failures Deep discharge protection for the batteries Internal & automatic battery testing function

Power supply for 12 V DC systems Space for 1 x 18Ah batteries Voltage-in-Parallel (ViP) mode Capable of parallel connection for increased capacity & reliability Short circuit & overload potection Mains failure detection Monitors for three different battery faults LED confirmation of fuse failures Deep discharge protection for the batteries Internal & automatic battery testing function

Converts open collector outputs to volt free contacts Wide operating voltage range Low current consumption Discrete and compact

3 Amps at 12VDC or 1.5 Amps at 24VDC selectable output; heavy duty self-contained, dual voltage, switching power supplies. Universal AC input allows for global use without plug-in transformer or alterations. Supervised power supply/charger module for the VBB/VLB Reader Controller or for 24 VDC peripheral devices such as VBB-RI reader interfaces. Designed for hardwire installations (not a plug-in device); 90-250 VAC Input. Enclosure Dimensions: 14" x 8.5" x 3.50". Supplied with two 12 VDC 7AH batteries. UL 294 Listed.

Power supply for 12 V DC systems Space for 1 x 18Ah batteries Voltage-in-Parallel (ViP) mode Capable of parallel connection for increased capacity & reliability Short circuit & overload potection Mains failure detection Monitors for three different battery faults LED confirmation of fuse failures Deep discharge protection for the batteries Internal & automatic battery testing function

The ACTpro 3200 from ACT is a 4-door controller housed inside a metal cabinet, complete with a 3 amp monitored power supply and a cable management system.  This 4-door controller is expandable to up to 16 doors using ACTpro door stations and it has all the features of the ACTpro 3000 two door controller combined with the ACTpro 200 two door station.ApplicationsUse when installation space is limitedUse in situations when a built-in power supply unit is preferredUse when monitoring of the power supply and battery state is preferredUse when the preference is for metal housing with tamper monitoringUse for large installationsFeatures3 Amp Regulated Power Supply with battery backup provision. Space for two 7Ahr batteries (not included).Connection to PC over TCP/IP or RS232/RS485Steel Cabinet (thickness 1.2mm) with hinged lidMonitored power supply with automatic battery testDeep-Discharge protection of batteries30,000 users1,024 user groupsPC connection using the built in TCP / IP or serial (RS232) port or RS485 (RS485 to serial converter required)"Clock & Data" and "Wiegand" format readersSupports ACTpro-X & 3rd party readersMemory card slot allows additional functionality: door plan, extra user rights, distributed intelligenceMonitored tamperProgrammable inputs & outputsEach door has a 5amp, 30 volt DC lock relay and a 1amp, 24 volt DC alarm relayFuse blown LED indicationMains fault indicationMonitored and reported alert notifications on Controller LCD and ACTWin software

Without backup battery.

Plug type power supply 230 VAC, 24 VAC, 500 mA. Supplied with 2.00 m DC cable with open end.

Indoor power supply 230 VAC / 24 VAC, 60 W. Supplied with 1.50 m mains power cable with European plut and screw terminal for 24 VAC output.