Board only Cost-effective IP access control module Up to 32 IP-ACMs per iSTAR Ultra and iSTAR Ultra SE, and up to 8 per iSTAR Ultra LT Convenient second port for biometric reader or efficient network diagnostics Wet lock outputs provide up to 0.75A each for ability to power most lock types Highly distributed architecture PoE or PoE Plus 10/100/GigE connectivity AES-256 network encryption Configurable offline mode Easy setup with static IP or DHCP Small, ‘office-ready” enclosure design Full duplex RS-485 on board to leverage future technology Selectable “wet” and dry output relays OSDP support fosters device interoperability Supports TLS 1.2 and 802.1X secure network protocols for protection against the threat of cyber attacks

C-CURE 9000 SiteServer mounting bracket 19-inch rack mount

iSTAR Edge G2 door controller with metal enclosure, supports four readers Stand-alone IP edge access controller with local database of up to 1,000,000 cardholders Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE+, with enough power for two doors and associated devices Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Advanced access control feature set including anti-passback, peer-to-peer clustering and local event logic Dual GigE Network ports with IPv6, DHCP and 802.1X support Supports OSDP Secure Channel for encrypted, two-way reader communications Supports embedded High Assurance FICAM operation without additional third-party hardware

Software House PSX-RGS-X1 is a 2U multi-purpose rack enclosure with slide assembly.

Powerful network-ready door controller for up to 32 readers (16 from ACMs) Dedicated DIP switch allows to go from “Pro mode” for use with C•CURE 800/8000 and C•CURE 9000 to “Ultra mode” for use with C•CURE 9000 Dual GigE network ports for redundant network operation Hardened Linux embedded OS for improved security and scalability Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality Manages up to 500,000 cardholders in local memory Socketed relays improve serviceability Dedicated input for fire alarm interlock overrides door locks during fire conditions Onboard 256-bit AES network encryption Great solution for enterprise and government installations

Supports 8 readers Ready to go with pre-installed C•CURE 9000 software and intuitive wizard for easy configuration Includes pre-configured database of readers, doors, controllers, and other standard objects to reduce setup time Can operate as a satellite application server (SAS) in an enterprise environment 256GB solid state drive (SSD) provides enhanced system reliability Intuitive C•CURE 9000 Web Client simplifies operator training Health dashboard to monitor network bandwidth, memory, and other important system functionality

ACM board with rack enclosure Supports eight Wiegand, RM or OSDP readers, along with 24 supervised inputs and 16 outputs which can be individually wet- or  dry-configured Embedded lock power management lowers installation costs Hardened Linux embedded OS for improved security and scalability Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality LCD provides important controller status and diagnostics information Manages up to 500,000 cardholders in local memory Dedicated input for fire alarm interlock overrides door locks during fire conditions Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications

Motherboard only Controls and powers all access control devices at the door to minimise installation costs Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

A high efficiency, offline switch mode, dual voltage power supply battery charger designed to provide both iSTAR Ultra system power, and lock power for a complete 16-door setup Capable of providing multiple power outputs and featuring user selectability for 12 or 24V DC on the lock supply, the wall mount unit is configured in a painted steel, locking enclosure with tamper switch and integral battery space

With eight output PTC Provides uninterrupted back-up power for iSTAR and apC/8X door controllers Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation Switched and resettable outputs Network communication interface option Intelligent battery charging and battery state monitoring Dual rate charging restores battery sets from 4Ah to 80Ah Reverse polarity, overcurrent, and thermal overload protection 4.5” enclosure depth accommodates large battery sets RoHS compliant, lead free, high efficiency design

In metal enclosure Cost-effective IP access control module Up to 32 IP-ACMs per iSTAR Ultra and iSTAR Ultra SE, and up to 8 per iSTAR Ultra LT Convenient second port for biometric reader or efficient network diagnostics Wet lock outputs provide up to 0.75A each for ability to power most lock types Highly distributed architecture PoE or PoE Plus 10/100/GigE connectivity AES-256 network encryption Configurable offline mode Easy setup with static IP or DHCP Small, ‘office-ready” enclosure design Full duplex RS-485 on board to leverage future technology Selectable “wet” and dry output relays OSDP support fosters device interoperability Supports TLS 1.2 and 802.1X secure network protocols for protection against the threat of cyber attacks

With enclosure Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE Plus with enough power for two doors and associated devices Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

GCM board in 2U rack mount enclosure Controls up to four ACMs (Access Control Modules) Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Embedded lock power management lowers installation costs Advanced controller-to-controller communications for cluster-based antipassback and I/O logic Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware

iSTAR Ultra enclosure 16 gauge carbon steel, with tamper switch

A large metal enclosure with tamper switch Up to four input or output modules

iSTAR Edge G2 board only, supports four readers Stand-alone IP edge access controller with local database of up to 1,000,000 cardholders Controls and powers all access control devices at the door to minimise installation costs Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Advanced access control feature set including anti-passback, peer-to-peer clustering and local event logic Dual GigE Network ports with IPv6, DHCP and 802.1X support Supports OSDP Secure Channel for encrypted, two-way reader communications Supports embedded High Assurance FICAM operation without additional third-party hardware

With dual outputs Provides uninterrupted back-up power for iSTAR and apC/8X door controllers Supervision of AC fault, system fault, ground fault, reverse battery, fire alarm activation Switched and resettable outputs Network communication interface option Intelligent battery charging and battery state monitoring Dual rate charging restores battery sets from 4Ah to 80Ah Reverse polarity, overcurrent, and thermal overload protection 4.5” enclosure depth accommodates large battery sets RoHS compliant, lead free, high efficiency design

GCM board with rack enclosure Controls up to four ACMs (Access Control Modules) Embedded lock power management lowers installation costs Hardened Linux embedded OS for improved security and scalability Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality LCD provides important controller status and diagnostics information Manages up to 500,000 cardholders in local memory Dedicated input for fire alarm interlock overrides door locks during fire conditions Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications

With enclosure and two RM-4 modules pre-mounted Controls and powers all access control devices at the door to minimise installation costs Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

GCM board Controls up to four ACMs (Access Control Modules) Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Embedded lock power management lowers installation costs Advanced controller-to-controller communications for cluster-based antipassback and I/O logic Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware

ACM board Supports up to eight Wiegand, RM or OSDP readers, 24 supervised inputs, and 16 outputs which can be individually wet- or dry-configured Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Embedded lock power management lowers installation costs Advanced controller-to-controller communications for cluster-based antipassback and I/O logic Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware

ACM board Supports eight Wiegand, RM or OSDP readers, along with 24 supervised inputs and 16 outputs which can be individually wet- or  dry-configured Embedded lock power management lowers installation costs Hardened Linux embedded OS for improved security and scalability Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality LCD provides important controller status and diagnostics information Manages up to 500,000 cardholders in local memory Dedicated input for fire alarm interlock overrides door locks during fire conditions Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications

iSTAR Edge G2 door controller with metal enclosure and two RM-4 modules, supports four readers Stand-alone IP edge access controller with local database of up to 1,000,000 cardholders Controls and powers all access control devices at the door to minimise installation costs Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Advanced access control feature set including anti-passback, peer-to-peer clustering and local event logic Dual GigE Network ports with IPv6, DHCP and 802.1X support Supports OSDP Secure Channel for encrypted, two-way reader communications Supports embedded High Assurance FICAM operation without additional third-party hardware

GCM board Controls up to four ACMs (Access Control Modules) Embedded lock power management lowers installation costs Hardened Linux embedded OS for improved security and scalability Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality LCD provides important controller status and diagnostics information Manages up to 500,000 cardholders in local memory Dedicated input for fire alarm interlock overrides door locks during fire conditions Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications

With enclosure, no PSU Powerful network-ready door controller for 16 readers Embedded lock power management lowers installation costs Hardened Linux embedded OS for improved security and scalability Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality LCD provides important controller status and diagnostics information Manages up to 500,000 cardholders in local memory Dedicated input for fire alarm interlock overrides door locks during fire conditions Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications

With enclosure, no PSU Powerful network-ready door controller for 8 readers Embedded lock power management lowers installation costs Hardened Linux embedded OS for improved security and scalability Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality LCD provides important controller status and diagnostics information Manages up to 500,000 cardholders in local memory Dedicated input for fire alarm interlock overrides door locks during fire conditions Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications

With enclosure, no PSU Powerful cyber-hardened network door controller for 16 readers Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Embedded lock power management lowers installation costs Advanced controller-to-controller communications for cluster-based antipassback and I/O logic Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware