Physical Security Information Management (PSIM) - News

Qognify ISM, a PSIM solution, to be launched at ISC West 2018

Qognify, the provider of in big data solutions for physical security and operations, will be presenting a new packaged solution, Qognify ISM - Intelligent Security Management, at ISC West 2018. Qognify is introducing a Physical Security Information Management (PSIM) based solution, featuring pre- or auto-configured components, to minimise the time and cost of implementation, reducing the time for the security organisation to gain value from this unified operational system. Compared to standard...

IT Governance achieves NCSC certification for Audit and Review cyber security consultancy service

IT Governance, a global provider of information security and cyber security expertise, has announced it has achieved National Cyber Security Centre (NCSC) certification for its Audit and Review consultancy service.  The Audit and Review service provides an in-depth and detailed evaluation of an organisation’s cyber security posture in relation to its compliance with UK government security objectives, policies, standards and processes, such as the HMG Security Policy Framework (SPF),...

SIA to felicitate Louroe Electronics' Richard Brent with 2017 SIA Chairman’s Award

The Security Industry Association (SIA) will recognise Richard Brent, CEO, Louroe Electronics with the prestigious 2017 SIA Chairman’s Award for his work to support leading the SIA International Relations Committee and supporting key government relations initiatives. With his service on the SIA Board of Directors and as Chair of the SIA International Relations Committee, Brent has forged relationships between SIA and agencies like the U.S. Commercial Service. A longtime advocate for gove...

CNL Software to exhibit latest IP Security Center PSIM solution at ISC West 2018

CNL Software, global pure play Physical Security Information Management (PSIM) software provider, will be showcasing its latest IP Security Center PSIM solution at the Connected Security Expo at ISC West in Las Vegas April 11-13, 2018. CNL Software will demonstrate how its PSIM technology helps law enforcement, government agencies and the military, owners and operators of public and private critical infrastructure, large corporations and school districts, colleges and universities, and transport...

PSIA addresses Physical Logical Access Interoperability specification at ISC West 2018

A critical issue for security officers today is how to make sure temporary or permanent employees are removed from the employee directory system when they are no longer working for the company. This situation arises especially in large enterprises, which may have different Physical Access Control Systems (PACS) supporting different offices or company operations. It is not uncommon for a company to make an acquisition and have two or more incompatible PACS systems. The simple way to address this...

Harper Chalice's perimeter security system integrates with ISM's Genesys PSIM

Harper Chalice has announced that its range of perimeter security system offerings are now able to fully integrate with the Genesys Physical Security Information Management (PSIM), manufactured by Integrated Security Manufacturing Systems (ISM). Genesys is the culmination of thousands of man-hours, engineering excellence and patent approved application. Genesys is a fully integrated Physical Security Information Management (PSIM) system capable of integrating multiple solutions. Interoperabilit...

PSIA and Cruatech collaborate to enhance test tools for PLIA security integration specification

The PSIA has announced an enhanced set of test tools for the PLAI specification. The driver behind updating the tool is to make it as easy and intuitive as possible for vendors to adopt the standards. “Effective test tools are critical for a specification to achieve true interoperability,” said David Bunzel, Executive Director of the PSIA. “We recognised that as the PLAI specification has evolved we needed to advance our tools to complement it.” Ensuring specification co...

PSIA demonstrates PLIA Agent security integration solution at ISC West 2018

A commercial version of the PLAI Agent will be demonstrated by the PSIA at ISC West 2018 in Las Vegas. Johnson Controls (Software House), Kastle Systems, and Princeton Identity will show the interoperability and exchange of identity information between disparate systems. “Having a commercial PLAI Agent, available to any company, is an important milestone for PLAI,” said David Bunzel, Executive Director of the PSIA. “It will enable Physical Access Control System (PACS) vendors t...

Advance Security Group unveils New Zealand’s first security robot, Harriet

Advance Security Group believes Harriet, New Zealand’s first security robot, will change the security industry as the first employee, who never needs a holiday, doesn’t need sick days and can work 24 hours a day. Security robot - Harriet The security robot, Harriet is capable of seeing obstacles, recognising licence plates, uniforms and faces. Mike Marr of Advance Security Group, said “It won’t mean people lose their jobs but rather, offer up new opportunities. What it...

CNL Software showcases Next Gen Control Room Automation at ISNR 2018

CNL Software, a world leader in Physical Security Information Management (PSIM) software, will be presenting its IPSecurityCenter PSIM solution on its stand at the International Security National Resilience Exhibition & Conference (ISNR) in Abu Dhabi, 2018. CNL Software has invited AXIS Communications and Quanergy to demonstrate automated threat detection, tracking and escalation in real time using the latest PSIM, LiDAR and video technologies. CNL Software, a world leader in Physical Secur...

Broco Rankin aquires Chamberlain Security, a manufacturer of safes and ATMs

Broco Rankin is pleased to announce the acquisition of long-time client Chamberlain Security, effective December 31, 2017. Founded in the early 1970's, Chamberlain Security is a manufacturer of high security components designed to protect the contents of safes, filing cabinets and ATMs. Chamberlain Security components are included in many commercial and residential safes as well as government GSA-rated (Government Services Administration) and UL® (Underwriters Laboratory) tested TL-15 and TL...

Inner Range’s Integriti Version 18 offers many enterprise-level enhancements

Checking security credentials on mobile devices, scalable vector graphics, Application Layer High Availability for customers who require Enterprise grade reliability and License Plate Recognition are among a series of new updates available for Inner Range’s intelligent integrated security solution Integriti. The newest developments are possible with an Integriti V18 software update and are available for new and existing customers immediately. Security staff will be able to check the valid...

ASIS and ATF Sign memorandum of understanding to promote cooperation for public safety and security

ASIS and the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) signed a Memorandum of Understanding (MOU) confirming their mutual intent to promote cooperation for public safety and security, and to develop education and information sharing programs. The challenges facing the private sector security industry and law enforcement in the protection of people, property, and information demonstrate there is value in programs and initiatives that draw on the expertise of private sector secur...

CNL Software’s IPSecurityCenter PSIM technology to enhance Gasunie’s critical security assets

CNL Software, a provider of Physical Security Information Management (PSIM) software, announces the selection of its IPSecurityCenter PSIM by Gasunie, the leading Dutch natural gas infrastructure and transportation company. IPSecurityCenter was chosen following a lengthy and detailed tender selection process throughout 2017, and will be delivered by CNL Software’s Dutch partner, Mactwin Security, as part of a ten-year contract. At the recent contract signing ceremony held at the Gasunie H...

CNL Software to demonstrate IPSecurityCenter PSIM solution at Intersec Dubai 2018

CNL Software, a developer of Physical Security Information Management (PSIM) software, has announced that it will be demonstrating its IPSecurityCenter PSIM solution, as chosen by leading law enforcement, Safe City and CNI organisations in the Middle East, on booth S1-C27 at Intersec Dubai 2018. CNL Software will also be presenting on the Promise Technology EMEA booth SA-C28 during the show. Intersec has become the region’s premium trade platform on security and safety, and this year will...

OPTEX demonstrates multi-layered approach to protecting critical infrastructure at Intersec 2018

Sensor manufacturer OPTEX will be demonstrating its multi-layered approach to protecting critical infrastructure – from the initial outer perimeter to the inner areas, including detection of unauthorised access. “In the Middle East region,” says Jacques Vaarre, Managing Director for OPTEX EMEA (Europe Middle East and Africa), “we are focusing on the high security element of our intrusion detection portfolio that protects critical infrastructure as there is the requiremen...

CNL Software’s IPSecurityCenter integrates with Jacques IP Communications System for industrial security

CNL Software, specialising in Physical Security Information Management (PSIM) software, has created an approved integration with Jacques Technologies’ IP Communications System. Efficient and cost-effective solution The integration via a High Level Interface (HLI) between IPSecurityCenter and Jacques’s IP Communications System allows organisations to create a Common Operating Picture (COP) of their entire infrastructure for all stakeholders through the integration of all security as...

Arecont Vision’s new multi-sensor release offers exciting new capabilities

A new Arecont Vision® multi-sensor sustaining release is available now, and it’s loaded with the features and product enhancements that were most requested by customers. Cybersecure cameras Arecont Vision megapixel cameras are cyber-secure and can be updated with new capabilities as they become available from our Engineering and R&D teams, working in conjunction with our many Technology Partner Program™ members. Participants include vendors of VMS, NVR, PSIM, video analytic...

TDSi integrates access control systems with ela-soft’s GEMOS PSIM platform

TDSi, a UK manufacturer of integrated access control systems, offering an extensive range of readers, controllers and software systems, integrates with GEMOS, a physical security information (PSIM) platform from ela-soft. The integration allows access control events to be viewed alongside other security applications on one comprehensive user interface. Comprehensive user interface Combining more than 750 existing applications, GEMOS adv. PSIM layers the physical position of each alert and all...

Arecont Vision adds Visual Management Systems Ltd to its Technology Partner Program

Arecont Vision®, a provider of IP-based megapixel camera technology, has announced that Visual Management Systems Ltd., the developer of the TITAN VISION PSIM (Physical Security Information Management System), has joined the Arecont Vision Technology Partner Program. Visual Management Systems “We are excited to team with Arecont Vision and to be part of their Technology Partner Program”, said Jay Shields, Managing Director for Visual Management Systems Ltd. “Our complete,...

CNL Software updates IPSecurityCenter V5.5 PSIM system software for integrated situation management

CNL Software, a provider of Physical Security Information Management (PSIM) system software, has announced the release of IPSecurityCenter Version 5.5. The release includes many performance and feature enhancements for large-scale and mission critical deployments of IPSecurityCenter for integrated, enterprise-wide situation management. As the size, scale, and complexity of IPSecurityCenter deployments continue to increase, so does its scalability, subsystem and sensor compatibility, and accessi...

Pelco will showcase enhanced Optera™ Panoramic Multi-Sensor Cameras at ASIS 2017

Pelco by Schneider Electric, a provider of surveillance, security products and technologies, is showcasing the company’s enhanced series of Optera™ Panoramic Multi-Sensor Cameras with SureVision™ 3.0 technology at ASIS 2017, Booth 2309. Superior surveillance and forensic analysis The 360°, 270° and 180° 12-megapixel multi-sensor cameras provide completely stitched, seamless and blended panoramic views with electronic PTZ capability across the entire panoramic imag...

SureView unveils new PSIM command centre map interface at ASIS 2017 Dallas

SureView Systems, a global provider of command centre solutions, is introducing their new mapping solution for the company’s Immix Command Center (CC) Physical Security Information Management (PSIM) platform at ASIS 2017. The new Immix geospatial-mapping interface allows users to better comprehend physical location information. The use of static facility floor plans overlaid directly onto the powerful Google Maps interface, dramatically increases ease of use and accuracy. SureView has fur...

CNL Software and Promise Technology form technology partnership for enterprise security applications

CNL Software, the pure play Physical Security Information Management (PSIM) provider has entered a technology collaboration with a developer of open storage platforms for video surveillance, Promise Technology. The partnership will enable CNL Software to provide an IPSecurityCenter PSIM platform in which Promise’s high-performance storage solutions can be used. This creates peerless integration opportunities along with the assured reliability offered by Promise’s surveillance-optimi...

Sensor manufacturer OPTEX opens new German office to support local channel partners

OPTEX, the sensor manufacturer, has opened a new office in Offenbach, Germany to better support its network of distributors and system integrators in Germany, Austria and Switzerland (DACH) region. Resource for DACH distribution partners The new facility near Frankfurt includes a meeting room with live products, and will be managed by Thomas Napora, Head of Business Development/Sales in the DACH region for OPTEX (security products). He is expecting business expansion in outdoor intrusion detec...

Promise Technology forms technology partnership with CNL Software

CNL Software, a provider of pure play Physical Security Information Management (PSIM), is pleased to announce it has entered a technology collaboration with Promise Technology, a developer of open storage platforms for video surveillance. The partnership will enable CNL Software to provide its IPSecurityCenter PSIM platform, in which Promise’s high-performance storage solutions can be used. This creates peerless integration opportunities along with the assured reliability, offered by Prom...

Qognify to showcase new integrated mobile and VMS solutions at ASIS 2017

Qognify, a provider of big data solutions for physical security and operations, has announced that it will showcase its new suite of integrated mobile solutions – Qognify Extend, alongside its award-winning video management (VMS), situation management and video analytics solutions, at ASIS 2017, Booth no. 1515, taking place between 25-28 September in Dallas, Texas. Qognify solutions at ASIS 2017 Qognify Extend – A cloud-based suite that extends the reach, coverage, and effectiven...

360 Vision Technology & Visual Management Systems partnership guards IP surveillance against cyber-attacks

As more and more security systems and devices become IP networked, it’s important for installers and end-users to consider how their systems will be protected against the possibility of cyber-attacks. Providing a solution to the concerns around cyber security and hacking, UK CCTV design and manufacturing company 360 Vision Technology has partnered with software control provider Visual Management Systems Ltd to provide security operators with an effective solution to guard against IP survei...

Bosch network cameras integrate with Qognify’s Situator and VisionHub for improved security management

Qognify, the provider of big data solutions for physical security and operations, announces that it has expanded the integration of Bosch network video security cameras and Qognify’s Situator and VisionHub, providing customers unique advanced technology and business benefits. This best-of-breed solution creates centralised management for the entire platform with direct integration of Bosch cameras to Situator (Situation Management / PSIM) and VisionHub (Video Management System). Benefits...

Hanwha integrates Wisenet X cameras with VMS solutions from Genetec and Milestone

Hanwha Techwin has announced it has successfully accelerated its programme to integrate Wisenet X cameras with leading VMS solutions such as Genetec Security Center 5.6 and Milestone XProtect. Supercharged by Wisenet 5, the most powerful DSP chipset ever incorporated into a full camera range, the latest generation of Wisenet X cameras feature the World’s best Wide Dynamic Range (WDR) and the World’s best motorised varifocal Low Light lens. The twenty six new H.265 cameras and domes...

Quick poll
What is the most significant challenge facing smart building security today?