Honeywell Security Video Management System

ADPRO iFT-E 16 IP channels, 10TB and 8 inputs / 4 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

Supports simultaneous recording, live monitoring, search and system management for 48 IP cameras including high definition formats Reliable and robust eight 8TB SAS hard drive providing 64TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 and 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 128 IP cameras including high definition formats Reliable and robust four 4TB SAS hard drive providing 16TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 and 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 128 IP cameras including high definition formats Reliable and robust twelve 12TB SATA hard drive providing 144TB raw storage 12 bay unit Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on PRO-Watch NVR for further investigation The number of false alarms are reduced with SMART VMD, object based motion detection analytics Integrates to full line of Honeywell IP cameras and encoders Support for ONVIF Profile S and Profile G, PSIA, real time streaming protocol (RTSP) and multicast standards Multiple PRO-Watch NVRs can be deployed for system expansion using a distributed architecture and are integrated with the PRO-Watch VMS enterprise video management system with Integrated Security Suite 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Reliable and robust four 8TB SAS hard drive providing 32TB raw storage Provides the processor and RAID enclosure in one chassis RAID 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 8 IP cameras including high definition formats Internal storage capacity of 20TB Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR XE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for up to 8 IP channels Includes HDMI, DVI-D and DVI-I ports for dual local monitor support providing access to monitoring and configuration interface Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface DVD R/W drive for burning evidence clips. Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system Small desktop type footprint suitable for small spaces with internal fixed drives, SATA hard drives used for operating system partition and video storage

Supports simultaneous recording, live monitoring, search and system management for 16 IP cameras including high definition formats Internal storage capacity of 16TB Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR XE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for up to 16 IP channels Includes HDMI, DVI-D and DVI-I ports for dual local monitor support providing access to monitoring and configuration interface Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface DVD R/W drive for burning evidence clips. Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system Small desktop type footprint suitable for small spaces with internal fixed drives, SATA hard drives used for operating system partition and video storage

ADPRO iFT-E 8 IP channels, 4TB and 8 inputs / 4 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Reliable and robust six 8TB SAS hard drive providing 48TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 and 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 128 IP cameras including high definition formats Reliable and robust twelve 12TB SAS hard drive providing 144TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 128 IP cameras including high definition formats Reliable and robust eight 8TB SAS hard drive providing 64TB raw storage Provides the processor and RAID enclosure in one chassis RAID 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

ADPRO iFT-E 32 IP channels, 2x6TB and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Reliable and robust four 4TB SAS hard drive providing 16TB raw storage Provides the processor and RAID enclosure in one chassis RAID 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Reliable and robust four 8TB SAS hard drive providing 32TB raw storage Provides the processor and RAID enclosure in one chassis RAID 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Internal storage capacity of 60TB (6 x 10 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 64 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

ADPRO iFT-E 16 IP channels, 6TB and 8 inputs / 4 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

ADPRO iFT-E 32 IP channels, 10TB and 20 inputs / 8 outputs (4HDD Ready) network video recorder Offers full remote monitoring features such as arming/disarming, event quad pictures, and reliable transmission via a proprietary acknowledge protocol Video recording, video analytics, and transmission (all remote monitoring ready) Support for all major camera brands and support ONVIF Profile S & T Compliant IP Cameras Integrated xTrace video content analytics (VCA) in XO 5: IntrusionTrace, LoiterTrace and Deep Learning Loiter Trace Deep Learning LoiterTrace™ for video verified loiter detection with reduced fault alarm and increased detection accuracy 2-way audio: enables instant remote communication to/from site P2P connection available for easy and flexible remote connection End to end secure streaming where video is encrypted (HTTPS) from the camera right through to the viewer to avoid tampering High-level integration with ADPRO PRO E-Passive Infrared (PIR) Detectors, including communication over IP, intelligent double knock, and creep zone alarm Xchange2 for adding video and VCA licenses Mobile apps for remote monitoring, verification, and control CMS command and control platforms: VideoCentral Platinum (VCP) and iOS/ Android iTrace App Open platform: easy integration with third-party software Superior detection and low false alarm rate with low CapEx. Highest quality of protection at a low TCO H.264/H.265 video compression and multistream for optimal bandwidth usage while providing the highest quality video for recording and viewing Easy management of multiple remote sites improves efficiency and reduces personnel cost. Full remote site surveillance and control, extending human guard surveillance Rapid assessment of video alarm images allows to quickly identify the alarm cause, optimising real-time intervention while reducing expensive nuisance alarm responses Alarm reception in less than 7 seconds Extremely fast, intelligent search on motion metadata after recording VMD: 4 zones per camera User-friendly: easy-to-use XO client for configuration and management

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Reliable and robust six 8TB SAS hard drive providing 48TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 and 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 128 IP cameras including high definition formats Reliable and robust eight 8TB SATA hard drive providing 64TB raw storage 12 bay unit Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on PRO-Watch NVR for further investigation The number of false alarms are reduced with SMART VMD, object based motion detection analytics Integrates to full line of Honeywell IP cameras and encoders Support for ONVIF Profile S and Profile G, PSIA, real time streaming protocol (RTSP) and multicast standards Multiple PRO-Watch NVRs can be deployed for system expansion using a distributed architecture and are integrated with the PRO-Watch VMS enterprise video management system with Integrated Security Suite 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Reliable and robust eight 8TB SAS hard drive providing 64TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 16 IP cameras including high definition formats Internal storage capacity of 20TB Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR XE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for up to 16 IP channels Includes HDMI, DVI-D and DVI-I ports for dual local monitor support providing access to monitoring and configuration interface Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface DVD R/W drive for burning evidence clips. Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system Small desktop type footprint suitable for small spaces with internal fixed drives, SATA hard drives used for operating system partition and video storage

Supports simultaneous recording, live monitoring, search and system management for 64 IP cameras including high definition formats Internal storage capacity of 36TB (6 x 6 TB) 1 solid state drive with operating system and 6 removable bays Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 64 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system

Capable of simultaneous record, playback, live view, archive, or transmission of digital video Utilises Intel processor technology Four monitor connections 16 GB of DDR3 RAM 250 GB SSD hard disk Preloaded with the latest MAXPRO software An ideal solution where digital video is mission critical in application such as airports, casinos, and critical infrastructure operations

Supports simultaneous recording, live monitoring, search and system management for 128 IP cameras including high definition formats Reliable and robust four 8TB SAS hard drive providing 32TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 and 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Reliable and robust ten 10TB SAS hard drive providing 120TB raw storage Provides the processor and RAID enclosure in one chassis RAID 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

5-bay: 5 hot-swappable drive bays in a robust desktop chassis, dual-core CPU, 2x1GbE ports and 2x 10GbE ports JBOD expansion support through an expansion board Simplified remote management with comprehensive embedded web-based management Support for RAID 5 and RAID 6 - protection from a catastrophic single or double drive failure Maximum incoming rate 256Mbps, outgoing rate 150Mbps LUN mapping and masking bring flexibility for multiple applications and OS support on the same storage subsystem Open architecture provides the industry’s most comprehensive support for SATA hard drives and standardsbased management interfaces including SNMP

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Reliable and robust four 4TB SAS hard drive providing 16TB raw storage Provides the processor and RAID enclosure in one chassis RAID 5 and 6 support for video storage is available through a hardware-based RAID controller Convenient web browser interface to manage the RAID controller Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes four 1 GB NICs optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Efficient Investigation with Smart Search and Playback Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and multi-imager camera support, and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system 2U Rack mountable with dual redundant power supplies

Supports simultaneous recording, live monitoring, search and system management for 32 IP cameras including high definition formats Internal storage capacity of 4TB (1 x 4 TB) 1 solid state drive with operating system and 1 removable bay Provides the processor and storage enclosure in one chassis Multi-stream support with maximum 128 streams per MAXPRO NVR SE. Support for configuring 1 preferred stream for continuous recording and 1 preferred stream for live video / motion based recording per camera Supports One-Way Audio (for specific IP cameras) with live, playback and clip export on desktop clients for 32 IP channels Includes HDMI, DVI-D and DVI-I ports for dual monitor support Allows local or remote operations including live and recorded video monitoring, configuration and system management in a single desktop client interface Includes dual 1 GB Network ports optimised to separate record and viewing data to ensure 100% recording and smooth playback even with multiple client connections Easy to use desktop clients, web client and mobile apps Intelligence events from cameras can be viewed at the alarm panel, and trigger recording on MAXPRO NVR for further investigation Integrates to full line of Honeywell IP cameras and HVE encoders Support for ONVIF Profile S, PSIA, real time streaming protocol (RTSP) standards Native device integrations supporting equIP® Series cameras’ new features: 4K resolution, H.265 video compression codec, 3D PTZ control, 360° camera and intelligence events Multiple MAXPRO NVRs deployed for system expansion using a distributed architecture and integrated with the MAXPRO Viewer multisite software or MAXPRO VMS enterprise video management system