Dantech Power Supplies

An In-Line power supply that provides a single regulated 12V DC 500mA output. The unit’s mains and output leads are wire ended to allow easy connection to terminal blocks etc. ABS, wall-mountable, case.

Power supply unit with a single regulated 12V DC 1A output. The unit’s mains and output leads are wire ended to allow easy connection to terminal blocks etc. ABS, wall-mountable, case.

A power supply with 2 x 2Amp 24V AC fused outputs. Ideal for powering 24V AC CCTV cameras and camera housing heaters.

A power supply with 8 x 1Amp 24V AC fused outputs. Ideal for powering 24V AC CCTV cameras and camera housing heaters.

A power supply that provides 1 x 4A 12V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A power supply that provides 4 x 1A 12V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A power supply with 2 x 1 Amp, 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A power supply that provides 2 x 2A 12V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A power supply with 4 x 1Amp 24V AC fused outputs. Ideal for powering 24V AC CCTV cameras and camera housing heaters. Metal cased.

A power supply with 1 x 4Amp 24V AC fused output. Ideal for powering 24V AC CCTV cameras and camera housing heaters. ABS IP66 rated enclosure.

A power supply that provides 4 x 500mA 24V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A power supply with 8 x 0.5Amp 24V AC fused outputs. Ideal for powering 24V AC CCTV cameras and camera housing heaters.

A power supply with 4 x 500mA 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A 3 Amp 12V DC (13.7) power supply with 4 individually fused outputs, which will house and charge one VRLA battery up to 7Ah capacity. Unit comes with SPCO contacts for indicating mains fail and low voltage states and also has a tamper microswitch. Steel cased.

A power supply that provides 8 x 500mA 12V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

A power supply with 1 x 1.5 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases, maglocks and CCTV cameras.

A power supply with 1 x 4Amp 24V AC fused outputs. Ideal for powering 24V AC CCTV cameras and camera housing heaters.

A power supply with 1 x 2 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A power supply with 2 x 2 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

Power supplies have a green LED “mains on” indicator and include a spares bag containing battery leads, cable entry gland, fixing screws and wall plugs.

A power supply with 1 x 1.5 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity.  This unit comes with two SPCO relays that provide mains fail and low voltage monitoring. Typical uses are for powering door access controllers, electric releases, maglocks and CCTV cameras.

A power supply with 8 x 500mA 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

A power supply that provides 1 x 2A 24V DC outputs. Each output is fused and is provided with internal LED indication, the PSU also accepts a wide mains input range. The unit is intended for use with CCTV cameras. Metal cased.

An in-line ABS cased wall mountable power supply with a 1.5Amp 24V AC output. Intended for powering 24V AC CCTV cameras and similar equipment.

A power supply with 4 x 1 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.

An in-line power supply with a 500mA 24V AC output. Intended for powering 24V AC CCTV cameras and similar equipment.

DA447 will provide 3 Amp 12V DC or 1.5 Amp 24V DC

A power supply with 1 x 4 Amp 12V DC (13.7) output, which will house and charge one VRLA battery up to 7Ah capacity. Typical uses are for powering door access controllers, electric releases and maglocks and CCTV cameras.