Dahua Technology Traffic surveillance

HWS600 vehicle speed measuring systems is mainly composed of the embedded host, HD intelligent camera, speed measurement radar, flash lamp and etc.

Supports synchronised illumination for snapshots and videos, integrating LED strobe and continuous light Supports displaying equipment online status, fault status, working status, equipment power, equipment temperature, equipment photosensitive value and other operation and maintenance status information of the illuminator in real time through RS485 on Dahua cameras or intelligent cabinets Supports adjusting the LED strobe brightness from 1 to 20 The illuminator filters the detected pulse width (below the configured threshold) to ensure the device works properly and improve reliability Supports shielding false triggering interference Streamline design, simple appearance and high saturation greatly improve the protection level (waterproof and dust-free) The inside heat dissipation design prevents the illuminator from overheating damage effectively Used for ANPR and E-police systems to provide lights for recognizing license plates (especially at night) and other vehicle attributes (such as vehicle models), and capturing traffic violations

Integrates functions such as LED continuous light, flashlight illumination and RS-485 maintenance Adjustable pulse width meets the brightness requirements of different scenarios Displays the error status of the illuminator on the camera web interface Less than 10 ms flash interval allows the camera to capture multiple snapshots Used for ANPR and E-police systems to provide lights for recognizing license plates (especially at night) and other vehicle attributes (such as vehicle models), and capturing traffic violations

EP200 has 2 megapixel high resolution CCD and video detection technology. It also has automatic license plate recognition.  The enforcement system takes several images of vehicles that illegally go through an intersection where the light is red and records the whole progress.

Supports synchronised illumination for snapshots and videos, integrating LED strobe and continuous light Supports displaying equipment online status, fault status, working status, equipment power, equipment temperature, equipment photosensitive value and other operation and maintenance status information of the illuminator in real time through RS485 on Dahua cameras or intelligent cabinets Supports adjusting the LED strobe brightness from 1 to 20 Supports configuring the pulse width of the flashlight as 0 ms to 3 ms Digital triggering Supports calculating the device service life through the duration of the strobe shines The illuminator filters the detected pulse width (below the configured threshold) to ensure the device works properly and improve reliability Supports shielding false triggering interference Supports controling multiple illuminators with one camera, through the connection between the Strobe synchronisation output line and the strobe trigger line of the next illuminator, to achieve the effect of multi-lane synchronisation illumination Streamline design, simple appearance and high saturation greatly improve the protection level (waterproof and dust-free) The inside heat dissipation design prevents the illuminator from overheating damage effectively Used for ANPR and E-police systems to provide lights for recognizing license plates (especially at night) and other vehicle attributes (such as vehicle models), and capturing traffic violations

Dahua Technology, a manufacturer and supplier of video surveillance products headquartered in Hangzhou, China, now offers the ITC235-TF1A Traffic Flow Analysis camera, capable of traffic flow applications including data collection and analysis, and vehicle type classification. High image quality 1/1.9inch Starlight CMOS image sensor, high colour reducibility, high sensitivity, super Low-Light effect H.264 standard HD video format and 25fps HD video frame rate Applications and accuracy Embedded integration component design, with a variety of algorithms, such as traffic data collection and analysis and vehicle type classification Up to 80m of traffic data counting range The accuracy of detection is over 99%, when the speed is below 80km/h A variety of signals, data and communication interfaces

4 × 8MP, 1/1.8" CMOS image sensor, low illuminance, high image definition Outputs max. 32MP (8192 × 3840) @25/30 fps; with intelligent functions enabled, it can output 32MP (8192 × 3840) @25 fps Built-in IR LED, max. IR distance: 30 m ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments Intelligent detection: Intrusion, tripwire Intelligent functions: Crowd distribution map, Vehicle situation Supports object tracking and image correction Support video clip, the image can be clipped as needed Supports max. 256 G Micro SD card 12V DC power supply IP67, IK10 protection

Integrates functions such as LED continuous light, flashlight illumination and RS-485 maintenance Adjustable pulse width meets the brightness requirements of different scenarios Displays the error status of the illuminator on the camera web interface Less than 10 ms flash interval allows the camera to capture multiple snapshots Used for ANPR and E-police systems to provide lights for recognizing license plates (especially at night) and other vehicle attributes (such as vehicle models), and capturing traffic violations

Supports synchronised illumination for snapshots and videos, integrating LED strobe and continuous light Supports displaying equipment online status, fault status, working status, equipment power, equipment temperature, equipment photosensitive value and other operation and maintenance status information of the illuminator in real time through RS485 on Dahua cameras or intelligent cabinets Supports adjusting the LED strobe brightness from 1 to 20 Supports configuring the pulse width of the flashlight as 0 ms to 3 ms Digital triggering Supports calculating the device service life through the duration of the strobe shines The illuminator filters the detected pulse width (below the configured threshold) to ensure the device works properly and improve reliability Supports shielding false triggering interference Supports controling multiple illuminators with one camera, through the connection between the Strobe synchronisation output line and the strobe trigger line of the next illuminator, to achieve the effect of multi-lane synchronisation illumination Streamline design, simple appearance and high saturation greatly improve the protection level (waterproof and dust-free) The inside heat dissipation design prevents the illuminator from overheating damage effectively Used for ANPR and E-police systems to provide lights for recognizing license plates (especially at night) and other vehicle attributes (such as vehicle models), and capturing traffic violations

Supports synchronised illumination for snapshots and videos, integrating LED strobe and continuous light Supports displaying equipment online status, fault status, working status, equipment power, equipment temperature, equipment photosensitive value and other operation and maintenance status information of the illuminator in real time through RS485 on Dahua cameras or intelligent cabinets Supports adjusting the LED strobe brightness from 1 to 20 The illuminator filters the detected pulse width (below the configured threshold) to ensure the device works properly and improve reliability Supports shielding false triggering interference Streamline design, simple appearance and high saturation greatly improve the protection level (waterproof and dust-free) The inside heat dissipation design prevents the illuminator from overheating damage effectively Used for ANPR and E-police systems to provide lights for recognizing license plates (especially at night) and other vehicle attributes (such as vehicle models), and capturing traffic violations

CP200 ANPR system is mainly composed of HD embedded CCD camera, flash lamp, vehicle detector, network transmission, equipment, and etc. CP200 Automatic Number Plate Recognition system is mainly used to record image of each vehicle at the entry/exit of road and important road section.