CEM Security devices

CEM DCM/310/006 is a two door controlller designed to interface third-party read heads with the CEM range of access control systems. Feature includes: Support for two doors RS485 host connection Structured database allows storage of large amounts of cardholder records for off-line card validation Reader communications via standard Wiegand or Mag Stripe interfaces Eight Supervised inputs (four available per door) Two Relays (normally opened or normally closed) Self resetting fuses – saves maintenance time Onboard LED - provides visual status Dedicated Tamper input

CEM CEQ/576/001 is a 1 port two door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation

CEM RDR/280/105 is a validation card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

CEM RDR/280/109 is a validation card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

CEM RDR/280/101 is a HID proximity card reader that are used to capture card numbers so that personnel can be associated with an ID card on the CEM AC2000 security management system. The card definitions and formats are easily configured locally using integrated keypad.

CEM RDR/615/201 fingerprint validation card reader is used to enroll cardholders and capture their fingerprint templates onto the AC2000 system. It enables both the validation of the card and the verification of a cardholders biometric fingerprint template.

CEM Systems DIU/700/231 offers a complete IP based access control solution that eradicates the need to provide local mains power at the door. The unit installation is classed as low voltage and can be completed by IT network installers without the expense of an electrician or electrical contractor.

CEM RDR/611/117 is a DESFire card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/101 is a card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM DCM/350/005 is a two door intelligent encrypted IP controller designed to interface to CEM sPass DESFire smart card readers. It has an on-board 10/100 Ethernet connection and communicates directly with the AC2000 server.

CEM RDR/611/104 is a proximity and MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/107 is a DESFire card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/114 is a Prox & MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/108 is a HID iClass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/118 HID iClass card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/611/115 is a MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/116 is a PicoPass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/114 is a Prox & Mifare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/117 is a DESFire card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/611/118 is a HID iClass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/611/106 is a PicoPass card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It gives full off-line validation and decision making at the point of entry, even when host communication is not available.

CEM RDR/610/101 is a HID Prox card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/111 HID Prox card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/104 Prox & Mifare card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/610/115 MiFare card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

CEM RDR/615/104 dual tech card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM RDR/615/108 HID iClass card reader is fully integrated biometric and access control reader. It controls access to restricted areas where an additional biometric layer of security is required. It's structured database allows storage of large amounts of cardholder records for off-line card validation.

CEM RDR/612/105 is an exit card reader with PIN designed for use as part of an integrated on-line access control system. It is an extension to the master reader, providing a combined total of features at the point of entry. It also features contactless card presentation with optional Personnel Identification Number (PIN) for two stage authentication.