Bosch Power Supplies

Bosch APS-PSU-60 is a power supply unit with an integrated battery charging device, that supports 12 V/7 Ah, 12 V/14 Ah and 24 V/7 Ah batteries, with selectable 12 VDC or 24 VDC voltage output.

Converts 24 VDC to 12 VDC Maximum current 500 mA Mounts in NNK100 enclosure or two converters on MAP Accessory Mounting Plate Limits and indicates over-current conditions

Provides up to 2 A of 12 V standby current for Fire or Burglar Applications (4 A of Burglary alarm current) Supervises up to two 12 V 7-18 Ah batteries independently for up to 36 Ah of capacity Provides up to 80 hours of standby time Easy-to-read switch addressing Uses the Bosch standard TR1850 plug-in transformer

Provides two independent power ports with fixed 28 VDC regulated output Provides 150 W for battery charging and system power Provides controlled 500 mA, 24 VDC nominal auxiliary output Provides colour‑coded terminal for easy installation Provides two dry relay contacts for AC and DC trouble signalling

Provides a remote power supply Transmits trouble and tamper events via LSN Can be connected to all centralised or decentralised LSN control panels A maximum of two 12 V/18 Ah batteries can be used

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Lead battery Shock-resistant plastic enclosure Dry-cell battery Can be used irrespective of its position Low self-discharge Can be used for intrusion alarm systems according to DIN EN 50131-1

Suitable for a power supply, 2x 18 Ah batteries and x LSN gateways Expands the MAP system Includes a expansion enclosure, tamper switch, enclosure lockset, and AC terminal block

The MIC-IPIR-PS-24 power supply features ONVIF conformant encoder and provides interoperability with other conformant systems.

Compatible with input and output modules that have 3-hole or 3-point mountings Compatible with receivers that have 3-hole or 3-point mountings Optional tamper switch mounting location

Bosch LTC 8905/90 is a 120/240 V AC power supply unit for LTC 8901 and LTC 8904 Series CPU equipment bay.

System transformer rated at 16.5 VAC, 40 VA Suitable for use on approved UL applications in the USA

120 VAC power supply unit 120VAC in, 24VAC out For AUTODOME 7000, MIC IP cameras without illuminators

A full range of MIC Series power supply units (PSUs), with integrated Bosch IP technology provides all connections for power, telemetry and video for MIC Series MIC550, MIC550IR, and MIC612 cameras. These MIC IP PSUs ensure that the cameras can be installed in a variety of locations, including low voltage and mobile applications.

Bosch VG4-A-PSU0 is a 24 VAC power supply unit for PTZ camera in the AUTODOME Series. It features white aluminium enclosure with cover and is IP66 and IK8 rated.

A full range of MIC Series power supply units (PSUs), with integrated Bosch IP technology provides all connections for power, telemetry and video for MIC Series MIC550, MIC550IR, and MIC612 cameras. The MIC IP PSU uses Dual Streaming to generate two independent IP video streams per channel if sufficient computational power is available. The MIC IP PSU features a highly flexible recording scheduler, providing up to ten programmable recording profiles and allowing individually assigned camera profiles.

A rechargeable 12 VDC sealed lead‑acid power supply used as a secondary power supply or in auxiliary or ancillary functions Maintenance‑free Long service life Suitable for supplying backup power for fire, security, and access control systems during AC power failures

Bosch VGA-SBOX-COVER is a cover for AUTODOME power supply box.

Provides all connections for power, telemetry and video for the MIC series range of PTZ cameras. Weather-resistant, cast-aluminum IP65 enclosure. Weather-resistant 1/2-in. NPT, M16, and M12 cableglands for connection of power, video, telemetry and ancillary equipment. Integrated washer pump drive with test function (IR power supplies only). Integrated four-input alarm terminal (IR power supplies only). Ground isolation and termination to control videogrounding and to prevent ground loops.

100 W power supply Constant Voltage design for external LED lighting applications Built-in active Power Factor Correction (PFC), typically > 0.93 Turn on time < 1 second with soft start Protection: Over-Load, Over Current, Open Circuit, Short Circuit, Over Temperature

Bosch UPA-12300-60 power supply unit is designed specifically for the continual use demands of professional surveillance products. While the unit is used primarily with security cameras, its small size and high energy efficiency rating also make it ideal for powering a wide range of other low power security products, including many Allegiant® system accessories and control devices.

Provides all connections for power, telemetry and video for the MIC series range of PTZ cameras. Weather-resistant, cast-aluminum IP65 enclosure. Weather-resistant 1/2-in. NPT, M16, and M12 cableglands for connection of power, video, telemetry and ancillary equipment. Integrated washer pump drive with test function (IR power supplies only). Integrated four-input alarm terminal (IR power supplies only). Ground isolation and termination to control videogrounding and to prevent ground loops.

Bosch UPA-2430-60 power supply unit is designed specifically for the continual use demands of professional surveillance products. While the unit is used primarily with security cameras, its small size and high energy efficiency rating also make it ideal for powering a wide range of other low power security products, including many Allegiant® system accessories and control devices.

Provides all connections for power, telemetry and video for the MIC series range of PTZ cameras. Weather-resistant, cast-aluminum IP65 enclosure. Weather-resistant 1/2-in. NPT, M16, and M12 cableglands for connection of power, video, telemetry and ancillary equipment. Integrated header for addition of ancillary cards such as the MIC alarm card, washer pump drive card or biphase converter card (non IR power supplies only). Ground isolation and termination to control videogrounding and to prevent ground loops.

35 W power supply Constant Voltage design for external LED lighting applications Built-in active Power Factor Correction (PFC), typically > 0.93 Turn on time < 1 second with soft start Protection: Over-Load, Over Current, Open Circuit, Short Circuit, Over Temperature

Provides all connections for power, telemetry and video for the MIC series range of PTZ cameras. Weather-resistant, cast-aluminum IP65 enclosure. Weather-resistant 1/2-in. NPT, M16, and M12 cableglands for connection of power, video, telemetry and ancillary equipment. Integrated header for addition of ancillary cards such as the MIC alarm card, washer pump drive card or biphase converter card (non IR power supplies only). Ground isolation and termination to control videogrounding and to prevent ground loops.