Low capacitance, non-shielded direct burial with water blocking tape barrier, suitable for wet locations Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant

Low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant

Low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant

Low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant

Low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS III and REACH compliant

Plenum rated, low capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS II and REACH compliant

Plenum rated, mid capacitance, non-shielded Technically matched to designated system’s wire specifications UL and c(UL)us listed RoHS II and REACH compliant

Provides a 24V DC output to power the strobe light in Aiphone’s wall boxes and towers The IX Series emergency stations have a secondary PoE output (passthrough) that can be used to connect to this splitter The PoE passthrough will only be usable if the IX Series station is connected and powered via a PoE+ switch

Flush wall-mounted Panel is made of self-extinguishing resin Frame & Back Box is made of self-extinguishing plastic

Vandal-resistant with 16-gauge stainless steel construction Flexible design can be mounted to either side of the door 1-gang hole pattern allows for easy installation

Weather resistant Vandal-resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

Mounts JO-DV, JP-DV, or JV-DV to a door frame or mullion Designed to fit unit precisely and conceals wiring inside Can mount to either right or left of door

An 18-Gauge stainless steel enclosure designed for surface mounting the JO-DVF, JP-DVF, and JP-DVF video door stations Weather resistant Vandal-resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

Compatible with most Aiphone surface mount door stations Attachment holes for different standard mounting boxes, including 1- and 2-gang Mild steel front box, stainless steel back plate Conduit knockout at the base

An interface between the door release contact on the Aiphone master station or CEU and the actual release mechanism Form C relay for 18-24V DC intercom systems Both normally open and normally closed output options

Allows an external device to be triggered when the intercom is called External device will be activated when the door station calls in

An adaptor for the JO Series video intercom system Allows two video door stations to be used in a standard or app-enabled system The adaptor has inputs for two JO Series video door stations and outputs to control door release for each of those door stations When a visitor calls at the door station, his image will be displayed on the inside station(s) The person at the JO-1MDW, JO-1MD, or JO-1FD, answers the call, and if they decide to grant the visitor entry, pushes the door release button to activate the electric lock only at the associated door If one door station is in use, the call button on the other door station will not activate a call-in

Made of 12 gauge stainless steel Fully enclosed beacon/strobe light on top Assistance Lettering ADA Compliant: 4″ depth to meet ADA requirements to allow mounting higher than 27″, and proper signage and call button mounting height

Made of 12 gauge stainless steel Caged beacon/strobe light on top Emergency Lettering ADA Compliant: 4″ depth to meet ADA requirements to allow mounting higher than 27″, and proper signage and call button mounting height

Made of 12 gauge stainless steel Caged beacon/strobe light on top Assistance Lettering ADA Compliant: 4″ depth to meet ADA requirements to allow mounting higher than 27″, and proper signage and call button mounting height

UL-514-A listed electrical box included at the base Access panel at the rear base of the tower EMERGENCY signage Beacon/Strobe is always lit; flashes during emergency call-in (Requires 24V DC) Weather and vandal resistant LED for station illumination in station over-hang (requires 24V DC) Call button mounting height and signage meets ADA regulations

Steel construction Six conduit knockouts

Works with existing 2-conductor wire Supplies PoE to stations LED status indicators

Works with existing 2-conductor wire Supplies PoE to stations LED status indicators

Provides a normally open dry contact closure upon call-in at a tenant station Also provides a contact to turn on external light at entrance station when calling tenant station

Weather resistant Vandal-resistant Inside space for cabling Mounts to flat wall surface Opening at bottom for drainage

Flexible design can overhang mullion on either side of the door Wire cutouts allow for installation when there is an external conduit Clearance for Cat-5/6 cables prevents overbending

Weather resistant Vandal-resistant Inside space for cabling Mounts to 1-gang box or ring Can mount on a flat wall