Tecnovideo 129AC (4)
The innovative 129AC Air Cooled camera housing perfectly fits the gap between very hot installations which require a liquid cooled camera housing and standard installations which don't need any cooling system. The enclosure is entirely manufactured in AISI316L stainless steel, making the 129AC the best solution in hot and harsh environments, where standard aluminium/plastic camera housings would be rapidly damaged by heat and corrosive agents, especially in industrial indoor installations. The 129AC is equipped with: a Vortex cooling tube installed on the back (which blows cold air inside the housing) three exhausting check valves installed on the front cover an air nozzle to cool down and, at the same time, keep clean the glass from dirt and dust. The Vortex tube output can be adjusted according the needs: an higher flow with less cool air or a lower flow with cooler air. The Tecnovideo ABFL-01 Air Filtering Battery is recommended to grant clean air to the front window as well as to the Vortex tube, filtering water and oil particles. Different models are available: 360 mm and 460 mm length, with 70 mm usable diameter front window, both for visible light cameras (Borosilicate window) and thermal imagining cameras (Germanium window). A full range of mounting accessories is available to meet every installation need (wall mount bracket, pole mount adaptor, corner mount adaptor). For more information, please visit the product page on Tecnovideo website: www.tecnovideocctv.com/air_cooled_camera_housing_129_ac.php.
Add to Compare
