Pelco S6230-PG0 2 MP wide dynamic range PTZ IP dome camera

Technical Specification

Features:

Make: Pelco
Model code: S6230-PG0
Chip Inch Size: 1/2 inch
Colour Type: Colour / Monochrome
Resolution TVL: 2 MP

Additional info:

Pelco S6230-PG0 part of Spectran Enhanced series IP dome system is compatible with Pelco’s powerful new VideoXpert™ video management system while maintaining backwards compatibility to Pelco’s legacy Endura® and Digital Sentry® VMS platforms. It also features open architecture connectivity to third-party software. Nine Pelco behaviours are preloaded and included as standard features including abandoned object, adaptive motion detection, AutoTracker and camera sabotage.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Pelco
Manufacturer	Pelco, Inc
Category	CCTV>IP Dome cameras
Model code	S6230-PG0
Chip Inch Size	1/2 inch
Colour Type	Colour / Monochrome
Resolution TVL	2 MP
Megapixel	Yes
Dome Type	PTZ
Sensitivity lux	0.008
Pan Speed ^o/ sec	0.1 ~ 80 ^o/ sec pan speed
Digital (DSP)	Yes
Tilt Speed ^o/ sec	0.1 ~ 45 ^o/ sec tilt speed
Electrical Specifications	Voltage: 24 V AC
Focal length	4.3 ~ 129 mm
Presets	256
Compression	H.264
Back Light Compensation	Yes
Auto Gain Control	Yes
Built-in IR LED	Yes
Zoom Ratio	x30
Network Properties	Network Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*, SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL, SMTP, FTP, and 802.1x (EAP) Image Frame Rate: 60 ips
Physical Specifications	Weight g: 3,100
Environmental Specifications	Operating Temp ^oC: -5 ~ +35 C (23 ~ 95 F)
System Requirements	Operating System: Windows® 7 (32-bit and 64-bit) with DirectX® 11, Windows XP Service Pack 3 with DirectX 9.0c, or Mac® OS X 10.4 (or later) Web Browser: Windows® 7 (32-bit and 64-bit) with DirectX® 11, Windows XP Service Pack 3 with DirectX 9.0c, or Mac® OS X 10.4 (or later)
Additional info	Pelco S6230-PG0 part of Spectran Enhanced series IP dome system is compatible with Pelco’s powerful new VideoXpert™ video management system while maintaining backwards compatibility to Pelco’s legacy Endura® and Digital Sentry® VMS platforms. It also features open architecture connectivity to third-party software. Nine Pelco behaviours are preloaded and included as standard features including abandoned object, adaptive motion detection, AutoTracker and camera sabotage.
Download PDF version Download PDF version