Mirasys WD1-4 video encoder

Technical Specification

Features:

Make: Mirasys
Model code: WD1-4
Video Inputs: 4 channels
Audio Input: Yes
Alarm Input: Yes

Additional info:

Broad support of Encodings – Virtually any analog camera can be supported as Mirasys encoders supports WD1/4CIF/2CIF/CIF/QCIF encodings by H.264/MPEG4/MPEG2 compressions all the way to 25 fps (PAL) or 30 fps (NTSC) and 15 fps MJPEG compression. WD1 (960H) resolution (960x576 PAL, 960x480 NTSC) is widescreen by default. Recording Server Can Reside Anywhere – The Recording Server (VMS) can reside anywhere on the IP network, and not where the analog cabling terminates, as when using a hybrid server with capture/grabber cards. Digital I/O Support – Compared to a hybrid server with capture/grabber card, the Digital I/O support is built-in/included with an encoder (no separate I/O card/device required). Can be powered and controlled by the Network – Mirasys encoders can be controlled by an SNMP manager, which has the task of monitoring or managing a group of hosts or devices on a computer network. Mirasys encoders support all different versions of SNMPv1/v2c/v3(MIB-II). The Mirasys WD1-4 can also be powered over the Ethernet (PoE).

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Mirasys
Manufacturer	Mirasys Ltd
Category	CCTV>Video servers (IP transmission)
Model code	WD1-4
Video Inputs	4 channels
Audio Input	Yes
Alarm Input	Yes
Video Outputs	1
Compression Type	H.264/ JPEG /M-JPEG/MPEG-4
Network Protocols	IPv4/v6, HTTP, HTTPS, QoS layer3 DiffServ, FTP, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, hkDDNS, NTP, RTSP, RTP/RTCP,TCP, UDP, IGMP, ICMP,DHCP, ARP, SOCKSv4/v5, PSIA, ONVIF, HIKCGI, netFilter
Interface	1 RJ-45 10 / 100 Mbps adaptive Ethernet interface (PoE)
Image per second (IPS)	15 ~ 30 fps
Physical Specifications	Dimensions mm: 114 x 48 x 128 Weight g: < 1000
Electrical Specifications	Voltage: 12 VDC / PoE Power Consumption: < 8 W
Environmental Specifications	Operating Temperature ^oC: -10 ~ +55 C (14 ~ 131 F) Operating Humidity %: 10 ~ 90
Additional info	Broad support of Encodings – Virtually any analog camera can be supported as Mirasys encoders supports WD1/4CIF/2CIF/CIF/QCIF encodings by H.264/MPEG4/MPEG2 compressions all the way to 25 fps (PAL) or 30 fps (NTSC) and 15 fps MJPEG compression. WD1 (960H) resolution (960x576 PAL, 960x480 NTSC) is widescreen by default. Recording Server Can Reside Anywhere – The Recording Server (VMS) can reside anywhere on the IP network, and not where the analog cabling terminates, as when using a hybrid server with capture/grabber cards. Digital I/O Support – Compared to a hybrid server with capture/grabber card, the Digital I/O support is built-in/included with an encoder (no separate I/O card/device required). Can be powered and controlled by the Network – Mirasys encoders can be controlled by an SNMP manager, which has the task of monitoring or managing a group of hosts or devices on a computer network. Mirasys encoders support all different versions of SNMPv1/v2c/v3(MIB-II). The Mirasys WD1-4 can also be powered over the Ethernet (PoE).
Download PDF version Download PDF version