ELATEC T4BO-F6 TWN4 MultiTech 2 LF/HF/NFC OEM RFID Card/Smartphone Reader Module

Technical Specification

Features:

Make: ELATEC
Model code: T4BO-F6
Reader Type: Proximity
Standalone/ Networkable: Networkable
Read Range mm: < 100 mm

Additional info:

The TWN4 MultiTech 2 reader is an all-in-one proximity reader for the following frequencies: 125 kHz, 134.2 kHz, 13.56 MHz, NFC. It can be connected through UART (TTL, RS232), USB, as well as Ethernet, and is available as a PCB module and with Desktop housing. TWN4 MultiTech 2 is also compatible with over 60 of the most common RFID technologies currently being used around the world. Furthermore, to expand the realm of supported contactless identification methods, the all-in-one reader also supports NFC and optionally Bluetooth Low Energy. It is compatible with the two most used smartphone operating systems - Android and iOS. Thus, it can also be integrated into mobile identification applications. In addition, TWN4 MultiTech 2 is flexibly programmable – when communicating with RFID transponders it can make automated decisions based on predefined rules. This type of configuration can easily be re-applied to other card readers by using a contactless configuration card, which considerably reduces installation times in large projects.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	ELATEC
Manufacturer	ELATEC GmbH
Category	Access Control>Access control readers
Model code	T4BO-F6
Reader Type	Proximity
Standalone/ Networkable	Networkable
Read Range mm	< 100 mm
Wiegand Interface	Yes
Clock-and-Data Interface	Yes
Electrical Specifications	Voltage: 4.3 V - 5.5 V via USB Power Consumption: RF field on: 120 mA typically / Sleep: 500 µA typ. / Cyclic Operation: TBD
Physical Specifications	Dimensions mm: 76 x 49 x 9 Weight g: 12
Environmental Specifications	Operating Temp ^oC: -25 ~ +80 C (-13 ~ +176 F) Operating Humidity %: 5 ~ 95
Additional info	The TWN4 MultiTech 2 reader is an all-in-one proximity reader for the following frequencies: 125 kHz, 134.2 kHz, 13.56 MHz, NFC. It can be connected through UART (TTL, RS232), USB, as well as Ethernet, and is available as a PCB module and with Desktop housing. TWN4 MultiTech 2 is also compatible with over 60 of the most common RFID technologies currently being used around the world. Furthermore, to expand the realm of supported contactless identification methods, the all-in-one reader also supports NFC and optionally Bluetooth Low Energy. It is compatible with the two most used smartphone operating systems - Android and iOS. Thus, it can also be integrated into mobile identification applications. In addition, TWN4 MultiTech 2 is flexibly programmable – when communicating with RFID transponders it can make automated decisions based on predefined rules. This type of configuration can easily be re-applied to other card readers by using a contactless configuration card, which considerably reduces installation times in large projects.
Download PDF version Download PDF version