Doorking 1815‐302 DK Prox Readers

Technical Specification

Features:

Make: Doorking
Model code: 1815‐302
Reader Type: Proximity
Reader Output format: 26-bit wiegand
Read Range mm: up to 51 mm

Additional info:

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free. There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC. AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Doorking
Manufacturer	DoorKing, Inc.
Category	Access Control>Access control readers
Model code	1815‐302
Reader Type	Proximity
Reader Output format	26-bit wiegand
Read Range mm	up to 51 mm
LED / Beep	2 color LED (Red, Green), Piezo Beeper
Wiegand Interface	Yes
Electrical Specifications	Voltage: 12 V DC
Additional info	Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free. There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC. AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).
Download PDF version Download PDF version