The Vigitron VB1001M is a passive transmission device with male BNC that transports video or PTZ (pan/tilt/zoom) signals over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet* (305m). Distances up to 3000 feet (1000m) can be achieved when it is used with Vigitron active UTP receivers. They use category 2-5 twisted pair wires and do not require power. Their design allows mounting directly to the video source or receiver without additional cabling. The VB1001M is compatible with all qualified cameras with a built-in twisted pair transmitters.
Make | Vigitron |
---|---|
Manufacturer | Vigitron, Inc. |
Model code | VB1001M |
Transmission type | UTP / CAT 5 transmission |
TX/RX | RX |
Telemetry Control | Yes |
Signal Mode | PAL, NTSC |
Cross Talk dB | 60 |
Physical Specifications |
Weight g: 7 Dimensions mm: 47 x 13.6 |
Environmental Specifications |
Operating Temp oC: -10 ~ +70 Operating Humidity %: 0 ~ 95 |
Additional info | The Vigitron VB1001M is a passive transmission device with male BNC that transports video or PTZ (pan/tilt/zoom) signals over unshielded twisted pair wires, point-to-point, for distances up to 1000 feet* (305m). Distances up to 3000 feet (1000m) can be achieved when it is used with Vigitron active UTP receivers. They use category 2-5 twisted pair wires and do not require power. Their design allows mounting directly to the video source or receiver without additional cabling. The VB1001M is compatible with all qualified cameras with a built-in twisted pair transmitters. |