The SM84A-164A matrix can be controlled by 4 remote keyboards in RS485. 8-16 alarm contact can be associated with the video input, which can be displayed on the video output in case of alarm. The alarm contacts are independent and configured as normally open (NO) or normally closed (NC). The telemetry control can be performed over the coax cable on the 8-16 video inputs and on the RS485 serial output. It is possible to control the video switching by a VCR trigger signal.
Make | Videotec |
---|---|
Manufacturer | Videotec |
Model code | SM84A-164A |
Series | SM Series |
Video inputs / ports | 16 channels |
Video Outputs | 4 outputs |
No of Alarms | 16 alarms |
Signal Mode | PAL, NTSC |
TX/RX | TX/RX |
Detector Range m | 1200 |
Video Signal V, ohms | 1 Vp-p, 75 Ohms |
Environmental Specifications | Operating Temperature oC: 0 ~ 45 |
Analogue Switcher Type | Matrix Switchers |
Additional info | The SM84A-164A matrix can be controlled by 4 remote keyboards in RS485. 8-16 alarm contact can be associated with the video input, which can be displayed on the video output in case of alarm. The alarm contacts are independent and configured as normally open (NO) or normally closed (NC). The telemetry control can be performed over the coax cable on the 8-16 video inputs and on the RS485 serial output. It is possible to control the video switching by a VCR trigger signal. |