Verkada’s CH52-E multisensor camera features four camera heads, providing unrivaled coverage from a single install point. The four 5MP sensors collectively capture 20MP of resolution. Each camera head can be repositioned and each lens can be zoomed up to 2.5x, allowing for comprehensive coverage while maintaining image detail. Each camera head is powered by a dedicated computer vision processor to provide the image quality, stability and analytics performance of four independent cameras. The CH52-E is built to withstand extreme conditions. Sealed interior components have full IP66 rated protection against dust particles and heavy rain. The robust exterior housing provides IK10 rated protection against direct impacts from vandals, hail and flying debris. Like all Verkada cameras, the CH52-E works out–of –the–box without any additional configurations. The CH52-E only requires a single PoE++ network port, making it the most efficient choice for scaling coverage while minimizing cable runs and port use.
| Make | Verkada |
|---|---|
| Manufacturer | Verkada Inc. |
| Model code | CH52-2TBE-HW |
| Chip Inch Size | 1/2.8 inch |
| Resolution | 20 MP (4 x 5MP) resolution |
| Digital (DSP) | Yes |
| Sensitivity Lux | 0.009 lux @ F1.9 (Color) ; 0 lux with IR Illuminators on |
| Electrical Specifications |
Voltage: PoE+, PoE++ Power Consumption: 27.69W |
| Focal Length mm | 3.7 ~ 7.7mm |
| Mount Type | Wall, Pole, Corner |
| Wide Dynamic Range | Yes |
| Network Properties |
Image Frame Rate: 24fps / sensor Interface: RJ-45 cable connector for Network/PoE connection; 10 / 100 Mbps |
| Electronic Shutter Range | 1 / 5 sec. to 1 / 32,000 sec. |
| Zoom | Yes |
| Compression Type | H.265, H.264 |
| Physical Specifications |
Weight g: 2,900g Dimensions mm: Ø275 x 118 |
| Environmental Specifications |
Protection: IP66, IK10 Operating Temperature oC: -40 ~ +50 C (-40 ~ +122 F) Operating Humidity %: 0 ~ 90 |
| Additional info |
Verkada’s CH52-E multisensor camera features four camera heads, providing unrivaled coverage from a single install point. The four 5MP sensors collectively capture 20MP of resolution. Each camera head can be repositioned and each lens can be zoomed up to 2.5x, allowing for comprehensive coverage while maintaining image detail. Each camera head is powered by a dedicated computer vision processor to provide the image quality, stability and analytics performance of four independent cameras. The CH52-E is built to withstand extreme conditions. Sealed interior components have full IP66 rated protection against dust particles and heavy rain. The robust exterior housing provides IK10 rated protection against direct impacts from vandals, hail and flying debris. Like all Verkada cameras, the CH52-E works out–of –the–box without any additional configurations. The CH52-E only requires a single PoE++ network port, making it the most efficient choice for scaling coverage while minimizing cable runs and port use. |