Control units are required for operating pan-and-tilt drives as the control commands from the control centre must be converted into electrical signals for the motors in the pan-and-tilt drive. The two CDC0401 and CDC0402 control units are particularly suitable for operation of pan-and-tilt drives with a power supply of 24 VAC or 230 VAC. The control units are driven via the SIMATRIX matrix range or the SUT48 keyboard. As the protocol is compatible with the SCU301 and SCU302 control units, extension of existing SIMATRIX systems by the two control units from this economy line is easily possible. Baud rate: 600 ~ 19,200 bits/s.
Make | Vanderbilt |
---|---|
Manufacturer | Vanderbilt Industries |
Model code | CDC0401 |
Electrical Specifications | Voltage: 230 VAC |
Environmental Specifications | Protection: IP67 |
Physical Specifications | Dimensions mm: 300 x 175 x 320 |
Accessories | Junction Box / Telemetry Control Unit |
Additional info | Control units are required for operating pan-and-tilt drives as the control commands from the control centre must be converted into electrical signals for the motors in the pan-and-tilt drive. The two CDC0401 and CDC0402 control units are particularly suitable for operation of pan-and-tilt drives with a power supply of 24 VAC or 230 VAC. The control units are driven via the SIMATRIX matrix range or the SUT48 keyboard. As the protocol is compatible with the SCU301 and SCU302 control units, extension of existing SIMATRIX systems by the two control units from this economy line is easily possible. Baud rate: 600 ~ 19,200 bits/s. |