Vanderbilt AP01M-2420 Door Modules - AP01P+24V PSU, metal cabinet

Technical Specification

Features:
Additional info:

The AP01M-2420 is used when is a complete, easy-to-use door control is required.The AP01M-2420 is a compiled product consisting of the following:- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable- One mounted Aliro AP Access Point Controller PCB- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage. The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition. Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.Operational time Example 1, 24V: One AP + one reader AR40S-MF + 24V lock strike plate (current 0.35A). Door set unlocked. Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.Operational time Example 2, 24V: Same as above but using a valid card every 10 seconds (current 0.30-0.40A). Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.

Make Vanderbilt
Manufacturer Vanderbilt Industries
Model code AP01M-2420
Series Aliro Door Controller + 24v PSU
Max No. of Doors per Controller 1
No of Cardholders 10 000
Electrical Specifications Voltage: 100 ~ 240 V AC
Physical Specifications Dimensions mm: 355 x 330 x 85
Weight g: 4,000
Environmental Specifications Operating Temp oC: -10 ~ +40 C (14 ~ 104 F)
Operating Humidity %: 0 ~ 75
Additional info

The AP01M-2420 is used when is a complete, easy-to-use door control is required.

The AP01M-2420 is a compiled product consisting of the following:
- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable
- One mounted Aliro AP Access Point Controller PCB
- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage.

The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.
A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.

Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition.

Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.

Operational time Example 1, 24V: One AP + one reader AR40S-MF + 24V lock strike plate (current 0.35A). Door set unlocked. Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.

Operational time Example 2, 24V: Same as above but using a valid card every 10 seconds (current 0.30-0.40A). Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.

Related Whitepapers