Pelco IME119-1I is a 1MP colour monochrome mini IP dome camera that delivers high definition (HD) resolution, consistent color science, fast processing power, and simultaneous advanced low-light performance with wide dynamic range (WDR) and anti- bloom technologies.
| Make | Pelco |
|---|---|
| Manufacturer | Pelco, Inc |
| Model code | IME119-1I |
| Chip Inch Size | 1/3 inch |
| Colour Type | Colour / Monochrome |
| Resolution TVL | 1MP |
| HD | Yes |
| Megapixel | Yes |
| Sensitivity lux | 0.0013 |
| Indoor/Outdoor | Indoor |
| Digital (DSP) | Yes |
| Mount Type | In-Ceiling mount |
| Electrical Specifications |
Voltage: PoE Power Consumption: 8.5 W |
| Focal length | 3 ~ 9mm |
| Compression | H.264, MJPEG |
| White Balance | Yes |
| Electronic Shutter range | 1 ~ 1/77,000s |
| S/ N (Signal/ Noise) Ratio dB | >60 |
| Built-in IR LED | Yes |
| Network Properties |
Interface: 100dBase-TX, RJ-45 Network Protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP) Control: PTZ Image Frame Rate: 30fps |
| Physical Specifications |
Dimensions mm: 222 x 329 x 176 Weight g: 1,200 |
| Environmental Specifications |
Operating Temp oC: -10 ~ +50 C (14 ~ 122 F) Operating Humidity %: 20 ~ 80 Protection: IP66 |
| System Requirements |
Operating System: Microsoft ® Windows ® 7 (32- and 64-bit), or Window Vista ® ; or Mac ® OS X 10.4 (or later) Web Browser: Internet Explorer ® 7.0 (or later) or Mozilla ® Firefox ® 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics |
| Additional info | Pelco IME119-1I is a 1MP colour monochrome mini IP dome camera that delivers high definition (HD) resolution, consistent color science, fast processing power, and simultaneous advanced low-light performance with wide dynamic range (WDR) and anti- bloom technologies. |