Pelco ESTI350-2N-X is part of Pelco Sarix TI Series thermal IP positioning system. It is designed to provide detection, recognition and identification of people and vehicles in any lighting condition, including complete darkness. The camera features an amorphous silicon detector which has lower fixed pattern noise and a more uniform response than vanadium oxide detectors. In addition, Pelco ESTI350-2N-X provides variable pan and titl speeds ranging from 0.1 to 40 degrees per second in manual pan mode and 0.1 to 20 degrees per second in manual tilt mode.
| Make | Pelco |
|---|---|
| Manufacturer | Pelco, Inc |
| Model code | ESTI350-2N-X |
| Colour Type | Monochrome |
| Resolution | 384 x 288 resolution |
| Digital (DSP) | Yes |
| Specialist Type | Thermal |
| Electrical Specifications |
Voltage: 24 V AC Power Consumption: 100 W |
| Motion Activated | Yes |
| Focal Length mm | 50 |
| Mount Type | Pedestal |
| Picture Elements HxV | 384 x 288 |
| Network Properties |
Image Frame Rate: 30 fps Interface: Inline RJ-45 for 100Base-TX |
| Signal Mode | PAL |
| Compression Type | H.264 / MJPEG |
| Physical Specifications | Weight g: 11,300 |
| Environmental Specifications | Operating Temperature oC: -40 ~ +50 C(-40 ~ +122 F) |
| Additional info | Pelco ESTI350-2N-X is part of Pelco Sarix TI Series thermal IP positioning system. It is designed to provide detection, recognition and identification of people and vehicles in any lighting condition, including complete darkness. The camera features an amorphous silicon detector which has lower fixed pattern noise and a more uniform response than vanadium oxide detectors. In addition, Pelco ESTI350-2N-X provides variable pan and titl speeds ranging from 0.1 to 40 degrees per second in manual pan mode and 0.1 to 20 degrees per second in manual tilt mode. |