NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault \ protection, transient protection, and ground loop free individually floating outputs.
| Make | NVT Phybridge |
|---|---|
| Manufacturer | NVT Phybridge |
| Model code | NV-4PS13-PVD |
| Input Voltage | 24 V AC |
| Output Voltage | 28 V AC |
| Power Supplies & Batteries | Yes |
| Environmental Specifications | Operating Humidity %: 0 ~ 95 |
| Physical Specifications |
Dimension mm: 235 x 44.5 x 184 Weight g: 3,200 |
| Additional info |
NV-4PS13-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel. Use with NVT's PVDTM transceivers for cable runs under 750ft (225m). A built-in passive receiver hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display load /no-load, miswires, or fault conditions at a glance. Automatic-reset fault \ protection, transient protection, and ground loop free individually floating outputs. |