Multi-channel power supply StubEQ active receiver hubs from Network Video Technologies

Product Profile

Key features:

  • Provides Class 2 SELV 28 VAC with up to 1 Amp/ch while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5 cable for each camera
  • Built-in distribution amp with 2 video outputs/channel (8 & 16-ch)
  • Full motion CCTV video at distances up to 1,500ft when used with any passive NVT transceiver 
  • Adaptive StubEQ™ fully automatic 2-band equalization provides adjustment free equalization 
  • Automatic-reset fault protection; transient protection
  • Individually floating power outputs and differential video inputs ensure ground-loop immunity
  • Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
  • Limited lifetime warranty

Visit the Network Video Technologies website for further information.

Technical Specification

Make NVT Phybridge
Manufacturer NVT Phybridge
Model code NV-32PS42-PVD
Output Voltage 28 V AC
Power Supplies & Batteries Yes
Additional info

The 32-channel NV-32PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQ™ Active Receiver Hubs have individual floating 28 V AC outputs that support at-distance camera loads up to 1 Amp per channel for cable runs up to 460m (1,500ft). A built-in StubEQ™ video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: per channel automatic-reset fault protection, transient protection, ground loop free individually floating outputs, and power and video diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVT's lifetime warranty.

Related Whitepapers

Six ways to eliminate costs, risks and disruption to your network