For mobile surveillance recording systems in transportation, storage devices need to be designed with application-tailored reliability, performance, security and product longevity in mind. Micron understands these requirements and offers one of the most rugged and robust industrial SSD product lines in the industry (M500IT).
Micron’s M500IT SSDs are available in 2.5” SATA format for traditional disk drive loading systems, as well as in a mSATA format for compact designs. These SSDs offer 256-AES encryption and TCG Opal2.0 compliance for data security. These SSDs are available for long-life, 5 years from the time of introduction vs. typical 2 years for standard SSDs, making them a great choice for deployments and serviceability in mobile surveillance applications.
Make | Micron |
---|---|
Manufacturer | Micron Technology, Inc. |
Model code | MTFDDAK064MBD-1AH12ITYY |
Series | M500IT |
Storage type | SSD |
Capacity | 64 GB |
Interface | SATA III (6 Gb/s) |
Length | 100.45 mm mm |
Width | 69.85 mm mm |
Height | 7 mm mm |
Operating temperature | -40 ~ +85 C (-40 ~ +185 F) |
Encryption | Self-Encrypting Drive |
Read/write rates | 500MB/s (Read), 130MB/s (Write) |
Additional info |
Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and eight channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures. The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability. The self-encrypting drive (SED) features a FIPS-compliant, AES-256 encryption engine, providing hardware-based, secure data encryption, with no loss of SSD performance. This SED follows the TCG/Opal specification for trusted peripherals. When TCG/Opal features are not enabled, the device can perform alternate data encryption by invoking the ATA security command set encryption features, to provide full-disk encryption (FDE) managed in the host system BIOS. TCG/Opal and ATA security feature sets cannot be enabled simultaneously. The data encryption is always running; however, encryption keys are not managed and the data is not secure until either TCG/Opal or ATA security feature sets are enabled. Where to Buy? Click here |