The HCU484X can be quickly set up and configured using the built-in OSD menu. This is used to select the wide dynamic presets and set up the dynamic range, the RS485, day night set up, the white balance, camera ID, AGC, line lock phase, digital slow shutter, DC lens drive level and shutter speed.
| Make | Honeywell Security |
|---|---|
| Manufacturer | Honeywell |
| Model code | HCU484X |
| Chip Inch Size " | 1/3 inch |
| Colour Type | Colour / Monochrome |
| Resolution TVL | 480 |
| Auto Iris | Yes |
| Sensitivity lux | 0.4 |
| Direct Drive | Yes |
| Lens Mount | CS mount |
| Electrical Specifications |
Voltage: 12 V DC / 24 V AC Power Consumption: 2.5 W |
| Focal Length mm | 5 ~ 50 |
| Mount Type | Wall, Ceiling |
| Wide Dynamic Range | Yes |
| Picture Elements HxV | 720 x 540 |
| Auto Gain Control | Yes |
| White Balance | Yes |
| Electronic Shutter range | 1/60 ~ 1/100,000 |
| S/ N (Signal/ Noise) Ratio dB | 52 |
| Synchronisation | Line-lock |
| Signal Mode | PAL |
| Video Output | 1 Vp-p, 75 Ohms |
| Physical Specifications |
Dimension mm: 67.22 x 61.90 x 99.93 Weight g: 500 |
| Environmental Specifications |
Operating Temperature oC: -10 ~ +45 Operating Humidity %: 20 ~ 80 |
| Additional info | The HCU484X can be quickly set up and configured using the built-in OSD menu. This is used to select the wide dynamic presets and set up the dynamic range, the RS485, day night set up, the white balance, camera ID, AGC, line lock phase, digital slow shutter, DC lens drive level and shutter speed. |