Heitel CamTel SVR 10 digital video transmission system for 10 analogue or IP cameras

Technical Specification

Features:
  • Make: Heitel
  • Model code: CamTel SVR 10
  • Transmission type: High-End transmission
  • Video Inputs: 10 channels
  • Alarm Inputs: 4 ~10 alarms
Additional info:

Integrated multiplexer. Integrated pre-alarm memory for alarm verification.Automatic establishment of ISDN/POTS/GSM/TCP/IP connection in the evert of alarm. Parallel transmission of up to 10 camera signals. Full screen display. Automatically establishes connection on alarm. Remote control of 2 relay (e.g. light, door opener). Transparent serial data channel to control cameras/matrices. Camline V.24 consists of a transmitter box with two camera connections, two alarm inputs, a relay output and the Windows software for the receiver PC. It is ideally suited for mobile operation particularly when used with an additional GSM. Resolution : 512 x 256 pixels, 256 x 128 pixels, 128 x 80 pixels.*connector, DHCP, auto detection within LAN

Make Heitel
Manufacturer HeiTel Digital Video GmbH
Model code CamTel SVR 10
Transmission type High-End transmission
Video Inputs 10 channels
Alarm Inputs 4 ~10 alarms
Built-in Modem Yes
TX/RX TX
Pre & Post Alarm Image Buffer Yes
Video Outputs 1
Presets 110
Network Properties Image Colour: Colour
Compression Type: MJ-PEG
Interface: 10/100 MBit/s built-in network adapter, RJ45*
Digital Yes
Signal Mode PAL/NTSC
Physical Specifications Weight g: 2900
Dimensions mm: 187 x 47 x 200
Electrical Specifications Power Consumption: 4.8 W
Voltage: 100-240V
Environmental Specifications Operating Temp oC: 5 ~ 40
Relays Outputs Alternate
Video Signal V, ohms 75 ohms
Relay Contacts A, V 48V, 0.2A
Additional info

Integrated multiplexer. Integrated pre-alarm memory for alarm verification.Automatic establishment of ISDN/POTS/GSM/TCP/IP connection in the evert of alarm. Parallel transmission of up to 10 camera signals. Full screen display. Automatically establishes connection on alarm. Remote control of 2 relay (e.g. light, door opener). Transparent serial data channel to control cameras/matrices. Camline V.24 consists of a transmitter box with two camera connections, two alarm inputs, a relay output and the Windows software for the receiver PC. It is ideally suited for mobile operation particularly when used with an additional GSM. Resolution : 512 x 256 pixels, 256 x 128 pixels, 128 x 80 pixels.

*connector, DHCP, auto detection within LAN

Related Whitepapers