NC300 from Genie can connect to cameras from anywhere and also has adjustable frame rate. It also automatically adjusts image quality by network bandwidth.
| Make | Genie CCTV Limited |
|---|---|
| Manufacturer | Genie Access Ltd. |
| Model code | NC300 |
| Chip Inch Size | 1/3 inch |
| Colour Type | Colour |
| Resolution | 420 resolution |
| Sensitivity Lux | 0.5 |
| Auto Iris | Yes |
| Direct Drive | Yes |
| Electrical Specifications |
Voltage: 12 V DC Power Consumption: 5.4W |
| Motion Activated | Yes |
| Picture Elements HxV | 720 x 576 |
| Network Properties |
Image Frame Rate: ~25 Interface: Ethernet 10/100 Base-T / 100 Base TX Auto MDIX RJ- Network Protocols: IPv4 / HTTP / TCP / ICNP / RTSP / RTP / UDP / IGMP |
| Back Light Compensation | Yes |
| Auto Gain Control | Yes |
| White Balance | Yes |
| Electronic Shutter Range | 1/50 ~ 1/100,000 |
| S/ N (Signal/ Noise) Ratio dB | >48 |
| Synchronisation | Internal |
| Signal Mode | PAL / NTSC |
| Compression Type | MPEG-4 |
| Physical Specifications |
Weight g: 350 Dimensions mm: 57 x 52 x 105 |
| Environmental Specifications |
Operating Temperature oC: -10 ~ +60 Operating Humidity %: 30 ~ 80 |
| System Requirements |
Operating System: Microsoft Windows XP SP2 or Above Framework 2.0 Hardware and System related properties: Pentium 4CPU 1.0 GHz or Higher DRAM 512 MB or Higher |
| Additional info |
NC300 from Genie can connect to cameras from anywhere and also has adjustable frame rate. It also automatically adjusts image quality by network bandwidth. |