Bosch NIN-932-V10IP day/night HD IP dome camera

Technical Specification

Features:
  • Make: Bosch
  • Model code: NIN-932-V10IP
  • Chip Inch Size: 1/3 inch
  • Colour Type: Colour / Monochrome
  • Resolution TVL: 3 MP
Additional info:

Bosch NIN-932-V10IP is a day/night IP dome camera for HD surveillance which features H. 264 quad-streaming; cloud services; free viewing Apps; IVA; 3 to 9 mm SR lens & high dynamic range. Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image.

Make Bosch
Manufacturer Bosch Security Systems
Model code NIN-932-V10IP
Chip Inch Size 1/3 inch
Colour Type Colour / Monochrome
Resolution TVL 3 MP
HD Yes
Megapixel Yes
Dome Type PTZ
Sensitivity lux 0.15
Indoor/Outdoor Indoor/Outdoor
Digital (DSP) Yes
Mount Type Flush mount or surface mount mount
Electrical Specifications Voltage: 24 V AC / 12 V DC
Power Consumption: 7.2 W
Focal length 10 ~ 23 mm
Compression H.264 (MP); M-JPEG
Back Light Compensation Yes
White Balance Yes
S/ N (Signal/ Noise) Ratio dB > 50
Signal Mode PAL / NTSC
Video Output 1 Vpp, BNC, 75 Ohm
Network Properties Interface: 10/100 Base-T, auto-sensing, half/full duplex
Network Protocols: IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbo
Control: e-PTZ
Image Frame Rate: 30 fps
Inclusive DVR/ Web Server: SD
Physical Specifications Dimensions mm: 158 x 124
Weight g: 1,280
Environmental Specifications Operating Temp oC: -30 ~ +50 C (-22 ~ +122 F)
Operating Humidity %: 5 ~ 93
Protection: IP66, IK10
Additional info Bosch NIN-932-V10IP is a day/night IP dome camera for HD surveillance which features H. 264 quad-streaming; cloud services; free viewing Apps; IVA; 3 to 9 mm SR lens & high dynamic range. Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image.

Related Whitepapers