Bosch NIN-40012-V3 true day/night HD IP dome camera

Technical Specification

Features:
  • Make: Bosch
  • Model code: NIN-40012-V3
  • Chip Inch Size: 1/3 inch
  • Colour Type: True Day / Night
  • Resolution TVL: 720p
Additional info:

Bosch NIN-40012-V3 is a true day/night IP dome camera for indoor surveillance. it features varifocal 3 to 10 mm lens, H.264 quad-streaming, cloud services, motion/tamper/audio detection & edge recording. Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image.

Make Bosch
Manufacturer Bosch Security Systems
Model code NIN-40012-V3
Chip Inch Size 1/3 inch
Colour Type True Day / Night
Resolution TVL 720p
HD Yes
Megapixel Yes
Sensitivity lux 0.05
Dome Type PTZ
Indoor/Outdoor Indoor
Digital (DSP) Yes
Electrical Specifications Voltage: 12 V DC
Power Consumption: 4.5 W
Focal length 3 ~ 10 mm
Rotation Angleso 355
Compression H.264 (MP); M-JPEG
Back Light Compensation Yes
White Balance Yes
Electronic Shutter range 1/25[30] ~ 1/150000 s
S/ N (Signal/ Noise) Ratio dB > 50
Video Output CVBS, 1 Vpp, 2.5 mm jack, 75 Ohm
Network Properties Interface: 10/100 Base-T, auto-sensing, half/full duplex
Network Protocols: IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbo
Control: e-PTZ
Image Frame Rate: 30 fps
Inclusive DVR/ Web Server: SD
Physical Specifications Dimensions mm: 135 x 102
Weight g: 554
Environmental Specifications Operating Temp oC: -20 ~ +50 C (-4 ~ +122 F)
Operating Humidity %: 20 ~ 90
Additional info Bosch NIN-40012-V3 is a true day/night IP dome camera for indoor surveillance. it features varifocal 3 to 10 mm lens, H.264 quad-streaming, cloud services, motion/tamper/audio detection & edge recording. Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image.

Related Whitepapers