MegaDome® G3 RS third generation megapixel cameras provide ample resolution to zoom-in for details in live or recorded video. With an IR corrected motorized lens and gimbal, MegaDome G3 RS is easy to install and manage with “no-touch” remote setup. Install the magnetic mounting plate, connect the PoE (Powerover-Ethernet) IP cable, magnetically snap in place and fasten the camera to the mounting plate, and then remotely configure the camera. Use the intuitive interface to remotely pan, tilt, zoom, and focus the sensor.
Make | AV Costar |
---|---|
Manufacturer | AV Costar (Arecont Vision) |
Previously known as | Arecont Vision |
Model code | AV2355RS |
Series | MegaDome G3 RS Series |
Chip Inch Size | 1/3 inch |
Colour Type | True Day / Night |
Resolution TVL | 1080p |
Megapixel | Yes |
Sensitivity lux | 0.02 ~ 0.2 |
Digital (DSP) | Yes |
Indoor/Outdoor | Indoor/Outdoor |
Mount Type | Corner, Flush, Pole, Pendant, Wall mount |
Electrical Specifications |
Voltage: 12 ~ 48 V DC / 24 V AC / PoE Power Consumption: 2.28 W |
Focal length | 2.8 ~ 6 mm |
Compression | H.264 |
Back Light Compensation | Yes |
White Balance | Yes |
Electronic Shutter range | 1ms–500ms |
S/ N (Signal/ Noise) Ratio dB | 45 |
Signal Mode | PAL, NTSC |
Network Properties |
Interface: 100Base-T Ethernet Network Protocols: RTSP, RTP/TCP, RTP/UDP, HTTP, DHCP, TFTP, HTTPS, 802.1x Image Frame Rate: 30 fps |
Physical Specifications |
Dimensions mm: 147 x 128 Weight g: 1020 |
Environmental Specifications |
Operating Temp oC: -40 ~ +50 C (-40 ~ +122 F) Operating Humidity %: 0 ~ 90 |
Additional info |
MegaDome® G3 RS third generation megapixel cameras provide ample resolution to zoom-in for details in live or recorded video. With an IR corrected motorized lens and gimbal, MegaDome G3 RS is easy to install and manage with “no-touch” remote setup. Install the magnetic mounting plate, connect the PoE (Powerover-Ethernet) IP cable, magnetically snap in place and fasten the camera to the mounting plate, and then remotely configure the camera. Use the intuitive interface to remotely pan, tilt, zoom, and focus the sensor. |