Altronix AL1012ACM220 Power Supply/Chargers with Multi-Output Access Power Controllers

Technical Specification

Features:
  • Make: Altronix
  • Model code: AL1012ACM220
  • Fail-Safe Operation: Yes
  • Voltage: 220 V AC (operating range 198 V AC - 256 V AC),
  • Dimensions mm: 394 x 305 x 114
Additional info:

Altronix ACM220 series distribute and switch power to access control systems and accessories. They convert a 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Make Altronix
Manufacturer Altronix
Model code AL1012ACM220
Fail-Safe Operation Yes
Electrical Specifications Voltage: 220 V AC (operating range 198 V AC - 256 V AC),
Physical Specifications Dimensions mm: 394 x 305 x 114
Accessories Power Supply/Chargers with Multi-Output Access Power Controllers
Additional info

Altronix ACM220 series distribute and switch power to access control systems and accessories. They convert a 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

Related Whitepapers