Altronix eFlow104NKA8QM Networkable Dual Output Power Supply/Charger
Technical Specification
- Make: Altronix
- Model code: eFlow104NKA8QM
- Input Voltage: 120 V AC
- Output Voltage: 24 V DC
- Power Supplies & Batteries: Yes
Altronix eFlow104NKA8QM converts a 120VAC 60Hz input into eight (8) fuse protected outputs. Outputs are individually selectable, providing 12VDC or 5VDC up to 6A and/or 24VDC up to 10A (240W total power) for access control panels, door locks, and ancillary devices. Power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. eFlow104NKA8QM will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple LINQ8ACM modules. This feature allows you to distribute the power over more outputs for larger systems. Built-in LINQTM Network Power Management facilitates monitoring, reporting and control of power/diagnostics.
Read moreMake | Altronix |
---|---|
Manufacturer | Altronix |
Category | CCTV>Power supplies & batteries |
Model code | eFlow104NKA8QM |
Input Voltage | 120 V AC |
Output Voltage | 24 V DC |
Power Supplies & Batteries | Yes |
Environmental Specifications |
Operating Temperature C: 0 ~ 49 C (32 ~ 120 F ) Operating Humidity %: 85 |
Physical Specifications |
Dimension mm: 305 x 394 x 114 Weight g: 4260 |
Additional info |
Altronix eFlow104NKA8QM converts a 120VAC 60Hz input into eight (8) fuse protected outputs. Outputs are individually selectable, providing 12VDC or 5VDC up to 6A and/or 24VDC up to 10A (240W total power) for access control panels, door locks, and ancillary devices. Power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. eFlow104NKA8QM will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. The spade connectors allow you to daisy chain power to multiple LINQ8ACM modules. This feature allows you to distribute the power over more outputs for larger systems. Built-in LINQTM Network Power Management facilitates monitoring, reporting and control of power/diagnostics. |
Download PDF version Download PDF version |
Access control system planning phase 2
DownloadHoneywell GARD USB threat report 2024
DownloadThe role of artificial intelligence to transform video imaging
DownloadSIA Identity and Biometrics Symposium
DownloadFacial recognition
Download