Ajax Socket (type F) Smart plug

• Make: Ajax
• Model code: Socket (type F)
• Switches: Yes
• Voltage: 110–230 V
• Dimensions mm: 65.5 × 45 × 45

Socket (type F) is a smart plug with a power-consumption meter. Socket (type F) controls the power supply of electrical appliances with a load of up to 2.5 kW. It indicates the load level and is protected from overload. Socket (type F) switches on and off the 230 V~ power supply in Ajax apps, by pressing the Button, or automatically by scenario. Socket (type F) is protected against voltage overload (exceeding the range of 184–253 V) or overcurrent (exceeding 11 A). In case of overload, the power supply switches off, resuming automatically when voltage is restored to ​​normal. In case of overcurrent, the power supply switches off automatically, but can only be restored manually by the user command in the Ajax app. The maximum resistive load is 2.5 kW. The maximum switching current is reduced to 8 A at 230 V~ when using inductive or capacitive loads. Socket (type F) with firmware version 5.54.1.0 and higher can operate in pulse or bistable mode, and you can select the relay contact status:- Normally closed — the device stops supplying power when activated and resumes when turned off.- Normally open — the device supplies power when activated and stops when turned off. Socket (type F) with firmware version below 5.54.1.0 only works in bistable mode with a normally open contact. In the app, users can check the power or amount of energy consumed by electrical appliances connected via Socket (type F). At low loads (up to 25 W), current and power consumption indications may be displayed incorrectly due to hardware limitations.