The all new Vigitron Vi1516VPD video, data and power combiner
Product Profile
Vigitron's Vi1516VPD is a passive transceiver device that also combines video, PTZ data and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 16 cameras for up to 750 feet and is designed to be installed in the control room. The Vi1516VPD has a 16-channel, fully isoplated class II built-in 28/24 VAC power supply. Each camera power output is equipped with a 2 A glass fuse accessible from front panel for extra protection.
Features include:
- Supports up to 16 cameras by providing Video, class IIPower and Data on a single Cat-5
cable per camera for up to 750 feet (230m) - Built-in passive transceivers with surge protection
- 16 isolated camera power individually selectable 24 or 28 VAC at 1 A max per channel, 12 A aggregated
- A glass fuse per channel, accessible from front panel
- Use with the Vi1053VPD transceiver at the camera
- Power present and fault indicator LEDs for each camera
- 60 dB cross talk and noise suppression on video signals
- 19", low profile 1U wall or rack-mountable
- 1U high wall or rack-mountable, 12" deep
- Cooling fans with temperature control
- Designed for structured wiring applications
- Limited lifetime warranty
Technical Specification
Make | Vigitron |
---|---|
Manufacturer | Vigitron, Inc. |
Category | CCTV>Analogue Transmission |
Model code | Vi1516VPD |
Transmission type | UTP / CAT 5 transmission |
Video Inputs | 16 channels |
TX/RX | TX/RX |
Signal Mode | PAL, NTSC |
Bandwidth MHz | 10 ~ 20 |
Cross Talk dB | 60 |
Physical Specifications |
Weight g: 10,000 Dimensions mm: 43 x 430 x 305 |
Electrical Specifications | Voltage: 110 ~ 220 V AC |
Environmental Specifications |
Operating Temp oC: -20 ~ +50 Operating Humidity %: 0 ~ 95 |
Video Signal V, ohms | 100 |
Additional info | The Vi1516VPD is a passive transeceiver device that also combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 16 cameras for up to 750 feet and is designed to be installed in the control room. The Vi1516VPD has a 16-ch fully isoplated class II built-in 28/24 VAC power supply. Each camera power output is equipped with a 2 A glass fuse accessable from front panel for extra protection. |
Download PDF version Download PDF version |
See comparison of Vigitron Vi1516VPD with similar Vigitron Analogue Transmission
Compare Vigitron Vi1516VPD with Analogue Transmission from other manufacturers
Related Whitepapers
Security investments retailers should consider for their 2021 budget
The security challenges of data centers
DownloadSecurity practices for hotels
DownloadAccess control system planning phase 2
DownloadSIA Identity and Biometrics Symposium
DownloadArtificial intelligence
Download