Vanderbilt Door access control

Surface mount magnetic contact for differential lines Tamper protected

Vanderbilt ACTENT-API licence for 3rd parties to integrate with ACT Enterprise Pro software.

Vanderbilt BS-8320 motor driven blocking device prevents unintended opening of doors.

Stainless steel vandal resistant cover for ACTpro 1030 readers (MF1030, EV11030, EM1030)

Vanderbilt MK-2000-3 surface mount housing to be used on non ferromagnetic materials such as wood and plastic.

Vanderbilt MK-4000-5 is a Z shape mounting bracket.

A flexible part wire signal cable The conductors have a blank Cu-lina, 1.0 mm2 and solid PE insulation The cable has a halogen free, flame retardant jacket and is intended for indoor installation The flame-retardant characteristics of the cable comply with the requirements for class F2 according to SS 424 14 75

High quality thick plate steel construction Modern, unobtrusive design Pre-drilled mounting points internal hardware and surface mounting Tamper input into ACC to detect unauthorised access Secure door lock External LED to show the ACC Power on/off No assembly required Minimal installation time Multiple points for cable insertion Space to secure peripherals; e. g. backup battery

Vanderbilt MK-2000-4 surface mount housing with strong magnet can be used on steel.

Security key lock for arming/disarming of alarm systems Space for Yale type lockset or similar Robust construction Three signalling LEDs Auxiliary buzzer Various tamper protection Typical applications are commanding set/unset/partial set of intrusion systems; any access control application where the lock must be protected against tampering; opening/closing roller shutters (doors for garages, shops, warehouses, etc.)

High quality thick plate steel construction Modern, unobtrusive design Pre-drilled mounting points internal hardware and surface mounting Tamper input into ACC to detect unauthorised access Secure door lock External LED to show the ACC Power on/off No assembly required Minimal installation time Multiple points for cable insertion Space to secure peripherals; e. g. backup battery

High quality thick plate steel construction Modern, unobtrusive design Pre-drilled mounting points internal hardware and surface mounting Tamper input into ACC to detect unauthorised access Secure door lock External LED to show the ACC Power on/off No assembly required Minimal installation time Multiple points for cable insertion Space to secure peripherals; e. g. backup battery

Security key lock for arming/disarming of alarm systems Space for Yale type lockset or similar Robust construction Three signalling LEDs Auxiliary buzzer Various tamper protection Typical applications are commanding set/unset/partial set of intrusion systems; any access control application where the lock must be protected against tampering; opening/closing roller shutters (doors for garages, shops, warehouses, etc.)

A field terminal designed for use with SiPass integrated Acts as a local interface between an advanced central controller (AC5100‚ AC5102 or AC5200) and authorised cardholders‚ enabling them to carry out tasks such as arming and disarming intrusion alarm areas

Siemens 5411 Cotag is a multi-function reader that features mode LED to show set-up status and provides intelligent functions.

ACTsmart2 Lock allows the lock control relay to be located inside a secure area, thus ensuring total protection for the relay.  Learns ID code from the ACTsmart2 device and will only operate its' relay when a valid card/pin is presented to the device. 

The AP01M-2420 is used when is a complete, easy-to-use door control is required.The AP01M-2420 is a compiled product consisting of the following:- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable- One mounted Aliro AP Access Point Controller PCB- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage. The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition. Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.Operational time Example 1, 24V: One AP + one reader AR40S-MF + 24V lock strike plate (current 0.35A). Door set unlocked. Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.Operational time Example 2, 24V: Same as above but using a valid card every 10 seconds (current 0.30-0.40A). Maximum time: 6 hours with 2 x 12V, 2.1 Ah batteries.

The FP5000 is designed to fit a Scandinavian lock case.  Suitable for lock cases with a distance of between 105 mm and 116 mm between the centre of the door handle and the centre of the lock cylinder.  Sensor: capacitive three-dimensional (requires that the finger is "alive").  Approx. 16,000 openings (lithium batteries) or one year, whichever comes first.

CD4000 is a battery-powered codelock that fits directly on an interior door. The programming of codes is carried out directly via the keypad. It is possible to manually change the settings to leave the door unlocked if necessary. The batteries used are standard alkaline or lithium cells.

A plug and play desktop reader for ACT Enterprise software Supports ACT RFID, HID, MIFARE Classic and DESFire EV1 technologies

RF30-EM is a Codoor unit that can be used either as a standalone product or as a wireless component in a SiPass Entro system. It contains a reader, keypad, controller, lock mechanism and power supply, all in a single housing. It is designed to be mounted directly on an interior door.

Facilitates non-contact door release Features a build-in mechanical override in case of power failure or electronic failure

InfoPoint is used as a reservation terminal for SiPass Entro and has an integrated function to send and receive information from/to the segment controller (acting as a web server). The InfoPoint uses TCP/IP and works similarly to a web browser in a PC. The terminal includes a color screen and keys for navigating. InfoPoint also has an EM proximity reader to identify the person who wants to use the unit.

The BC16 is a magnetic stripe card reader. It has a tough metal construction and provides standard clock & data output. It is waterproof and its reading head is rated at 1,000,000 swipes.

Fingerprint codoor.  Quick and easy to install.  Stores up to 32 fingerprint templates.  Capacitive three-dimensional sensor.  Internal power supply.  Fingerprint Codoor offers the use of up to 32 different fingerprint templates and up to four four-digit codes.  

The AP01M-1220 is used when is a complete, easy-to-use door control is required.The AP01M-1220 is a compiled product consisting of the following:- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable- One mounted Aliro AP Access Point Controller PCB- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage. The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition.Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.Operational time (Example): One AP + one reader AR40S-MF + magnetic lock (current 0.85A). Door set locked. Maximum time: 8.5 hours with 1 x 12V, 7.0 Ah battery.

The SPCK623.100 comfort keypad is ideal to operate single area and multi area applications in a user friendly way. The 4 soft keys and the multi dimensional navigation key allow an easy operation with a minimum of operation steps. Status information and ‘next step’ prompts are clearly displayed on the large LCD. Customer logo, emergency or quick set functions can be displayed in idle state. The integrated card reader enables quick setting / unsetting of areas by use of a proximity card only or in combination with a valid user PIN. The built in speaker and sensitive microphone support audio features such as alarm verification or voice annunciation. The functionality can be enhanced with the SPCE110 key switch expander or the SPCE120 indication expander.

Compact proximity reader Robust construction Suitable for internal and external applications VdS approved Compatible with the SPC system via SPCA210 Wiegand interface