Pelco DX9232H Digital video recorder (DVR)

Technical Specification

Please note: this is a discontinued product.

Go to Replacement product

Features:

Make: Pelco
Model code: DX9232H
Series: DX9200 Series
Channels: 32 channels
Recording Mode: Timelapse / Event recording

Additional info:

The DX9200 Series Digital Video Recorder (DVR) is an enterprise class recording system that can store and play back images from any number of cameras at 7.5, 15, or 30 images per second per camera simultaneously. These images are transferred to a number of RAID storage units for safekeeping and can be recalled from Viewstations that are connected to the network. The storage units use RAID technology. Level 5 or Level 5+1 is available. In Level 5, data is divided between drives in such a way that if one drive fails, the data can be reconstructed from the remaining drives. Because of the low bandwidth requirements on the network, the system can be distributed over many buildings in many different physical locations in different cities or even countries.

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Pelco
Manufacturer	Pelco, Inc
Category	CCTV>Digital video recorders (DVRs)
Model code	DX9232H
Channels	32 channels
Recording Mode	Timelapse / Event recording
Monitor Outputs	1
Inbuilt Multiplexer	Yes
Multiplexer Type	Duplex
Storage Capacity GB	Unlimited GB storage
Image per second (IPS)	12.5(PAL) / 15(NTSC) fps storage rate
Compression Type	MPEG-1
Resolution	352 x 288 resolution
Signal Mode	PAL / NTSC
Recording System	RAID
Mount type	32 in, 1 out
Network Type	LAN / WAN
IP Ready	PTZ
Physical Specifications	Dimensions mm: 177.8 x 482.6 x 497.8 Weight kg: 24.4
Electrical Specifications	Power Consumption: 235
Environmental Specifications	Operating Temp ^oC: 5 ~ 29 Operating Humidity %: 80%
Additional info	The DX9200 Series Digital Video Recorder (DVR) is an enterprise class recording system that can store and play back images from any number of cameras at 7.5, 15, or 30 images per second per camera simultaneously. These images are transferred to a number of RAID storage units for safekeeping and can be recalled from Viewstations that are connected to the network. The storage units use RAID technology. Level 5 or Level 5+1 is available. In Level 5, data is divided between drives in such a way that if one drive fails, the data can be reconstructed from the remaining drives. Because of the low bandwidth requirements on the network, the system can be distributed over many buildings in many different physical locations in different cities or even countries.
Download PDF version Download PDF version