Heitel CamTel SVR 10 digital video transmission system for 10 analogue or IP cameras

Technical Specification

Features:

Make: Heitel
Model code: CamTel SVR 10
Transmission type: High-End transmission
Video Inputs: 10 channels
Alarm Inputs: 4 ~10 alarms

Additional info:

Integrated multiplexer. Integrated pre-alarm memory for alarm verification.Automatic establishment of ISDN/POTS/GSM/TCP/IP connection in the evert of alarm. Parallel transmission of up to 10 camera signals. Full screen display. Automatically establishes connection on alarm. Remote control of 2 relay (e.g. light, door opener). Transparent serial data channel to control cameras/matrices. Camline V.24 consists of a transmitter box with two camera connections, two alarm inputs, a relay output and the Windows software for the receiver PC. It is ideally suited for mobile operation particularly when used with an additional GSM. Resolution : 512 x 256 pixels, 256 x 128 pixels, 128 x 80 pixels.*connector, DHCP, auto detection within LAN

Contact manufacturer Contact manufacturer Datasheet Datasheet

Make	Heitel
Manufacturer	HeiTel Digital Video GmbH
Category	CCTV>Analogue Transmission
Model code	CamTel SVR 10
Transmission type	High-End transmission
Video Inputs	10 channels
Alarm Inputs	4 ~10 alarms
Built-in Modem	Yes
TX/RX	TX
Pre & Post Alarm Image Buffer	Yes
Video Outputs	1
Presets	110
Network Properties	Image Colour: Colour Compression Type: MJ-PEG Interface: 10/100 MBit/s built-in network adapter, RJ45*
Digital	Yes
Signal Mode	PAL/NTSC
Physical Specifications	Weight g: 2900 Dimensions mm: 187 x 47 x 200
Electrical Specifications	Power Consumption: 4.8 W Voltage: 100-240V
Environmental Specifications	Operating Temp ^oC: 5 ~ 40
Relays Outputs	Alternate
Video Signal V, ohms	75 ohms
Relay Contacts A, V	48V, 0.2A
Additional info	Integrated multiplexer. Integrated pre-alarm memory for alarm verification.Automatic establishment of ISDN/POTS/GSM/TCP/IP connection in the evert of alarm. Parallel transmission of up to 10 camera signals. Full screen display. Automatically establishes connection on alarm. Remote control of 2 relay (e.g. light, door opener). Transparent serial data channel to control cameras/matrices. Camline V.24 consists of a transmitter box with two camera connections, two alarm inputs, a relay output and the Windows software for the receiver PC. It is ideally suited for mobile operation particularly when used with an additional GSM. Resolution : 512 x 256 pixels, 256 x 128 pixels, 128 x 80 pixels. *connector, DHCP, auto detection within LAN
Download PDF version Download PDF version