RBtec perimeter security systems provide a wide range of innovative perimeter security solutions announces a new buried sensor solution that will grow its range of underground security technologies.
The Seismo buried sensors are sold in kits variations of 1 or 3 sensors with single analyser to protect strategic areas from intrusion, the system can be battery or DC power operated.
Each Seismo unit can cover up to 22ft diameter. The kits are sold with optional wireless or GSM communication on top of the standard dry contact relay output. The Seismo is an outdoor seismic detector, which can be integrated with any existing security or alarm system.
The Seismo Unattended Ground Sensors Kits comes in 2 variations, single 1 standalone sensor and analyser or 3 sensing units with single analyser.
Seismo is installed underground and is able to recognise footsteps and vehicles movements.
Seismo is resistant to extreme environmental conditions such as weather & temperature changes
and can work in large variety of terrains with no interference by vegetation or strong winds.
The Seismo system is a real time intrusion detection meant to detect intruders on the way IN, when an activity is registered in the protected area, the seismic sensor produces a signal which is processed in real time through the advanced algorithm, identifying which type of activity has been registered; walking or vehicle and triggering an alarm based on the sensitivity level.
The Seismo has been developed according to the highest standards and is designed to work without any maintenance. The system outputs are dry contacts that can be connected to any alarm system or DVR, the system does not need any calibration and it’s fully plug & play with a step by step installation manual.
The Seismo is Ideal for: Access routes, Yards, Construction sites, Farms, Perimeter soft spots, Detection ahead of the fence, Open areas with no traffic.