Fermax 1490 external doorlock relay MEET

Technical Specification

Features:
  • Make: Fermax
  • Model code: 1490
  • Series: MEET IP SYSTEM
  • Operating Temperature oC: -40 ~ +70 C (-40 ~ +158 F)
  • Operating Humidity %: 20 ~ 80
Additional info:

The DUAL RELAY MEET MODULE can be installed as an auxiliary element for MILO/KIN w/keypad panels or MILO 1W panels, as well, having a different performance in each case:MILO/KIN DIGITAL panelsWhen installed indoors, it works as a secury device, since the electric lock is controled directly from a relay of this device instead of the relay in the panel.In that way is not posible to manipulate the wires of panel, installed outodoor, for opening the door maliciously.MILO 1W panelsRelay 1 is activated simultaneously with the panel relay, when the door is opened fron the monitor.Relay 2 allows the control of a secoundary electric lok for the garage, garden, etc.In both cases, it is also posible to activate manually the relays by means of exit pushbutons.

Make Fermax
Manufacturer Fermax Electrónica S.A.U.
Model code 1490
Series MEET IP SYSTEM
Environmental Specifications Operating Temperature oC: -40 ~ +70 C (-40 ~ +158 F)
Operating Humidity %: 20 ~ 80
Protection: IP30
Electrical Specifications Voltage: 12 V DC
Physical Specifications Dimensions mm: 115 x 57 x 34
Weight g: 110
Additional info

The DUAL RELAY MEET MODULE can be installed as an auxiliary element for MILO/KIN w/keypad panels or MILO 1W panels, as well, having a different performance in each case:

MILO/KIN DIGITAL panels

When installed indoors, it works as a secury device, since the electric lock is controled directly from a relay of this device instead of the relay in the panel.
In that way is not posible to manipulate the wires of panel, installed outodoor, for opening the door maliciously.

MILO 1W panels

Relay 1 is activated simultaneously with the panel relay, when the door is opened fron the monitor.
Relay 2 allows the control of a secoundary electric lok for the garage, garden, etc.

In both cases, it is also posible to activate manually the relays by means of exit pushbutons.

Related Whitepapers