Altronix ACM8CB Multi-Output Access Power Controller
Technical Specification
- Make: Altronix
- Model code: ACM8CB
- Fail-Safe Operation: Yes
- Voltage: 12 ~ 24 V AC/DC
- Dimensions mm: 203 x 114 x 19
Altronix ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
Read moreMake | Altronix |
---|---|
Manufacturer | Altronix |
Category | Access Control>Access control system accessories |
Model code | ACM8CB |
Fail-Safe Operation | Yes |
Electrical Specifications | Voltage: 12 ~ 24 V AC/DC |
Physical Specifications | Dimensions mm: 203 x 114 x 19 |
Additional info |
Altronix ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. |
Download PDF version Download PDF version |
Related Whitepapers
Three essential reasons to upgrade your access control technology in 2022
10 top insights in access, cloud and more
Protecting dormitory residents and assets
Access control system planning phase 2
DownloadHoneywell GARD USB threat report 2024
DownloadThe role of artificial intelligence to transform video imaging
DownloadSIA Identity and Biometrics Symposium
DownloadFacial recognition
Download